So I got my car serviced, timing belt, oil, filters, plugs.... Currently at 65K. Didn't take it to Audi and my mechanic was unable to reset the computer so that the "Service" warning goes away. Does anyone know how to reset it? TIA.

 

buy a new audi, LOL

 

You hold the wrench icon, turn the car into the on position, and then hit the odo reset button.

 

1 OF 1
I hope its the car in your signature

[IMG]local://upfiles/12092/CEEA188E6D044A7EA1A4B55B77ED52B3.jpg[/IMG]

 

any info about b5 ? I have the same problem.

 

on the b5 you hold trip reset in till service oil apears the push the left clock button

 

Resetting Without Scan Tool
Notes

Resetting Service Interval Display With Adjustment Buttons For Trip Recorder And Clock









Switch ignition OFF.
Press trip recorder reset button -2- on instrument cluster and at same time switch ignition ON. The trip recorder display -3- will read:
"service OIL".


Release button.
Pull clock adjuster button -1 - on instrument cluster and hold for approx. 2 seconds . This resets "service OIL" display.
Note: Depending on the make of the instrument cluster; the display on the trip recorder will either continue to read:
"service OIL" (Nippon Seiki)
or
change to ---- -" (VDO).



Press trip recorder reset button -2- again to advance to next type of service.
Release button. The trip recorder display -3- will read:
"service INSP".


Pull clock adjuster button -1 - on instrument cluster and hold for approx. 2 seconds. This resets "service INSP" display.
Note: Depending on the make of the instrument cluster the display on the trip recorder will either continue to read:
"service INSP" (Nippon Seiki)
or
change to ---- -" (VDO).



Switch ignition OFF.

 

1 of 2

[IMG]local://upfiles/12092/A6171AFF3F7C47B2B81B6A1041FDF2E9.jpg[/IMG]

 

2 of 2

[IMG]local://upfiles/12092/79515414D087425384C3F6133AE1CA4C.jpg[/IMG]

 

Thanks fellas, will try later.