![]() |
techs i need your help, multiple codes
ok so today im driving around and my car feels different, No CEL but then again im pretty sure my CEL light is burnt out. anyways i pull ou tmy code reader and WTF i have 7 codes.
16545 16525 16539 16519 they all refer to the O2 sensors, apparently all four 17817- tank ventalation value-electrivcal malfunction 17808-EGR vavle circuit-electrical malfunction 17919-Intake manifold changeover valve-electrical malfunction whats going on here, the car runs, it drive i just have these random @$$ codes out of nowhere, the only thing that i can think thats changed in my habits is i seafoamed the car yesterday. BTW 1996 audi A4 quattro 5 speed. |
RE: techs i need your help, multiple codes
Since you think your CEL is burned out, clear the codes, drive the car for a day, and then check the codes again. Some of those codes could have been there for weeks or more. If you're still getting the electrical fault codes, then check the physical condition of the wiring harness, look for rotting insulation near the plugs and anywhere the sheathing can be puled back. A lot of german cars from that era use wiring harnesses made by the same company and they are all starting to have problems with the wire insulation deteriorating and causing multiple shorts.
|
RE: techs i need your help, multiple codes
that was the first thing i checked, all wires look good, cleared codes last night, came back today. only other person to get this was redgoat and ive already PMed him so hopefully he can shed some light on the matter.
|
RE: techs i need your help, multiple codes
#
[IMG]local://upfiles/12092/1FD36B04D3C2437FA53007C78661EC4F.jpg[/IMG] [IMG]local://upfiles/12092/701C103C6A3549A5A4B0464BC4737541.jpg[/IMG] [IMG]local://upfiles/12092/6FDA03CBA0214D48B5F318AF3A1E5B2B.jpg[/IMG] |
RE: techs i need your help, multiple codes
hopefully that tells a few stories and it doesnt mean all 02 sensors;)
|
RE: techs i need your help, multiple codes
ok so i was on AW and i read one of redgoats post saying he had a blown fuse, #29 to be exact, i pulled it out and sure enough it was out, on the panel it said it was engine timing, replaced it and imediatly all codes went away without me even clearing them.
|
RE: techs i need your help, multiple codes
well that would answer your question # 29 = EVAP valve, o2 sensor heating, intake manifold valve ( remind me to say check all the fuses lol;))
|
| All times are GMT -4. The time now is 04:11 PM. |
© 2026 MH Sub I, LLC dba Internet Brands