I am selling off all of the components to a head that I was building for my rabbit. Its all unassembled but all of the parts are there. I bought most of this as a set-up so not exactly sure where everything is. For those that don't know, the ADR core is the same as the AEB core meaning. The ADR was the european 1.8L NA big port head so the same specs as the AEB, it just had different cams from the factory.

If I don't sell it, I'll probably just assemble it install it and sell the aeb head thats on the car. Heres whats included

ADR head - empty (also a bit pitted in the exhaust ports, should be polished a bit)
Shrick 260 cams - 0301 A1 601-00 with adjustable cam chain sprockets ( i think? they bolt onto the cam see pics)
Hi rev valve springs - tectonics i think?
intake and exhaust valves - used
valve guides - intake side, never replaced, exhaust side new and need to be installed
head gasket
head bolts
16v manual timing belt tensioner
cam chain tensioner seals
Freshly sandblasted valve cover


Info on the cams can be found here under pn 0301 A1 601-00
http://www.avl-schrick.com/dat/MK/AV...ICK_2008_E.pdf

 

still got everything!

 

Still got this stuff?

 

can u call me 6318755334