TONS of B5 parts COMPLETE part out
Alright so here is the deal. I have a 97 Audi A4 1.8T Quattro automatic with 107K miles that I am parting out. I just pulled the motor out because I had plans to build a slight stroked motor with forged internals to handle a Big Turbo. Something has come up and I must quit the project.
I am selling everything; here are the NEW parts that I just got in two days ago for the motor:
Engine Parts:
(1) SET of JE Pistons - 83mm bore,9:1 CR $590
(1) Rod Set, Scat, 144mm 20mm pin, 4-cyl $325
(1) Main Bearing Set, 4-cyl and 1.8t, Coated SOLD
(1) Main Stud Kit, VW I4 including 1.8t SOLD
(1) Rod Bearing Set, VW 4-cyl, Coated SOLD
(1) 83mm big bore head gasket $80
(8) supertech exhaust valves $250
(1) Cylinder Head overhaul kit $95
(1) Crankshaft Seal A8060-91047 $30
(2) Camshaft Seal A8080-54506 $10
I JUST Paid = $1750.00 + SHIPPING
If someone is interested, I can go ahead and have the engine built with all the new internals. I can give you a price on this. I have already made preparations with my machine shop, so this is not a problem. With these parts, the engine can handle LOTS of PSI.
Here are the parts that are NEW and still in the box:
Nuespeed Extreme TIP $200
APR R1 Diverter Valve $100 Sold
RS4 Front Bumper (In Box) SOLD
Drilled/Slotted Rotors and Pads (This are stock size and fitment) Front and Rear $150 Sold
And here is just some of the other stuff (All in good shape):
Automatic Transmission $475
Cylinder Head $450
Cylinder Block $400
Black Leather Interior (driver seat has a 4” tear by the side airbag, quite common)
Fully Polished Intake Manifold $425
M3 Mirrors $75 SOLD
Rear Spoiler $25
Stock K03 Turbo $150 SOLD
Stock Exhaust Manifold $70
Silicone TIP (for K03 and K04) $65
Eibach Lowering Springs $100 Sold
Blisten Shocks $325 Sold
Front Nuespeed Sway Bar $150
Rear Nuespeed Sway Bar $200 Sold
Autometer Boost and Fuel/Air ratio Guages and Double A-Pillar Pod $100
3" Test Pipe (only used for 300 miles) has 02 buds SOLD
Evolution Motorsports FMIC (just core, no piping) will fit behind stock bumper $375
ECU w/ GIAC chip $450
18" Black VSR Wheels and Tires (Less than 3,000 miles) 5x112 $500 Sold
Milltek catback exhaust SOLD
Just PM me if you need something that is not listed. I am parting the entire car out. I do not have time to put it back together and sell it. If you are SERIOUS and need a picture of something please feel free to ask. If you are interested in something, send me an offer. I have a picture of the car before I pulled the motor and while I was pulling it out, just send me your email and I will send them. I will be taking photos of a lot of the parts on Friday. Thanks for looking. I might also be willing to hook someone up with a package deal for everything.
[IMG]local://upfiles/45257/709DFB5157D84F75A9EC75D0CCD55C7E.jpg[/IMG]
[IMG]local://upfiles/45257/F27F69F79B524A62B667D8A532D8C814.jpg[/IMG]
I am selling everything; here are the NEW parts that I just got in two days ago for the motor:
Engine Parts:
(1) SET of JE Pistons - 83mm bore,9:1 CR $590
(1) Rod Set, Scat, 144mm 20mm pin, 4-cyl $325
(1) Main Bearing Set, 4-cyl and 1.8t, Coated SOLD
(1) Main Stud Kit, VW I4 including 1.8t SOLD
(1) Rod Bearing Set, VW 4-cyl, Coated SOLD
(1) 83mm big bore head gasket $80
(8) supertech exhaust valves $250
(1) Cylinder Head overhaul kit $95
(1) Crankshaft Seal A8060-91047 $30
(2) Camshaft Seal A8080-54506 $10
I JUST Paid = $1750.00 + SHIPPING
If someone is interested, I can go ahead and have the engine built with all the new internals. I can give you a price on this. I have already made preparations with my machine shop, so this is not a problem. With these parts, the engine can handle LOTS of PSI.
Here are the parts that are NEW and still in the box:
Nuespeed Extreme TIP $200
APR R1 Diverter Valve $100 Sold
RS4 Front Bumper (In Box) SOLD
Drilled/Slotted Rotors and Pads (This are stock size and fitment) Front and Rear $150 Sold
And here is just some of the other stuff (All in good shape):
Automatic Transmission $475
Cylinder Head $450
Cylinder Block $400
Black Leather Interior (driver seat has a 4” tear by the side airbag, quite common)
Fully Polished Intake Manifold $425
M3 Mirrors $75 SOLD
Rear Spoiler $25
Stock K03 Turbo $150 SOLD
Stock Exhaust Manifold $70
Silicone TIP (for K03 and K04) $65
Eibach Lowering Springs $100 Sold
Blisten Shocks $325 Sold
Front Nuespeed Sway Bar $150
Rear Nuespeed Sway Bar $200 Sold
Autometer Boost and Fuel/Air ratio Guages and Double A-Pillar Pod $100
3" Test Pipe (only used for 300 miles) has 02 buds SOLD
Evolution Motorsports FMIC (just core, no piping) will fit behind stock bumper $375
ECU w/ GIAC chip $450
18" Black VSR Wheels and Tires (Less than 3,000 miles) 5x112 $500 Sold
Milltek catback exhaust SOLD
Just PM me if you need something that is not listed. I am parting the entire car out. I do not have time to put it back together and sell it. If you are SERIOUS and need a picture of something please feel free to ask. If you are interested in something, send me an offer. I have a picture of the car before I pulled the motor and while I was pulling it out, just send me your email and I will send them. I will be taking photos of a lot of the parts on Friday. Thanks for looking. I might also be willing to hook someone up with a package deal for everything.
[IMG]local://upfiles/45257/709DFB5157D84F75A9EC75D0CCD55C7E.jpg[/IMG]
[IMG]local://upfiles/45257/F27F69F79B524A62B667D8A532D8C814.jpg[/IMG]
Hey I was wondering if you have the cowl that covers the battery and brake resivor. also i need the plastic cowl that covers the lower part of the windsheild and also covers the wiper motors. let me know if you have the cowl that covers the battery. and send me some pictures if you do to roofboy2@hotmail.com.


