Archive - Vehicles for Sale Post your vehicles for sale.

FS: 1991 Audi 200 20v Quattro 3B Lago Blue

 
Thread Tools
 
Search this Thread
 
  #1  
Old 04-08-2014, 11:02 AM
sully200's Avatar
1st Gear
Thread Starter
Join Date: Apr 2014
Posts: 1
Default FS: 1991 Audi 200 20v Quattro 3B Lago Blue

Up for sale is my 1991 Audi 200 20v Quattro Engine code 3b, color is Lago Blue. I bought this car 3 years ago with 104k on it. Previous owner lied about a few of the things done to the car. The biggest one being the suspension. I have done my best to take the best care possible of this car while i have owned it. It has been my daily driver and has never let me down.

Im not in a huge rush to sell this car. But i am looking to buy a truck before the summer gets going. I am OPEN to trade offers for a truck. Must be 4wd capable and of equal value of my car.

Asking price is 4,000 or best offer please email scbrownhill@gmail.com if you are interested.

Name:  46d8e69d-d52d-4a61-8aff-0d9ab2e2c864_zps5fdb9b56.jpg
Views: 136
Size:  119.2 KB

LINK TO FULL PHOTO ALBUM: FS 1991 Audi 200 Slideshow by Sully16 | Photobucket



Mods:
Car has a fancy wood trunk insert that i have never put in the car. has been kept inside in perfect shape
7a cams
Ben Swann chipped (because of the 7a cam's the car does not like to hot start, as his chips were designed to be used with stock cams)
WG spring for the chip
Forge 007 DV
V8 Tails
Bosch high flow fuel pump
034 crank case breather hose
Custom charge pipe leading to throttle body
Full Bilstein sport Ground control setup in the rear of the car. 700lb springs in the rear, no helper springs or dust sleeves on the setup

Parts replaced: I HAVE RECEIPTS FOR JUST ABOUT EVERYTHING BOUGHT
New clutch kit (installed at 133,xxx miles)
Oil pump housing gasket
n75 valve
Motor mounts
Transmission mounts
Exhaust Manifold gasket
All turbo gaskets
Valve cover gasket
Tie rods on both sides
Rear rubber brake lines
Throttle Position sensor
Timing Belt, water pump and Thermostat replaced
Spark plug wires (Bosch 09268)
Dist cap (Bosch 03239)
Plugs (Bosch F5DP0R)
Rotor (forgot the PN but its the correct rotor for the 3B)
Front suspension mounts
All power steering lines rebuilt at a shop.
New tires at 132,xxx (General Altimax HP)
New Fuel Filter (Mann WK8341)
Most Vacuum lines have been replaced, but not all of them.
remanned starter

Interior:
Seats are all in great shape. 9/10
Rugs have been scrubbed down and cleaned 2 times now 8/10
Door cars are all intact, no tears 9/10
Dashboard is in great shape 9/10
Heated seats all work
Rear diff still locks
exterior temp gauge does not read correctly
Odometer computer thing had never worked.
Heat works.
AC system removed by P.O.

The biggest issue:
The front suspension needs to be replaced. The previous owner claimed he put full bilstein sports on ground control all around. Although this is true in the rear; The front setup is ground control on stock struts. The springs are the wrong diameter and do not sit correctly in the perch, this causes lots of binding,creaking.Suspension in the front is 100% blown and although it is fine to drive, it is bouncy, and the car sits slightly lopsided because of the springs being too big. Also know that the rear suspension does not have any helper springs installed,so there is some binding and popping in the rear as well. Just had my friends who own a shop test out the rear suspension and it is 100% ok no leaks.

Other issues:
Small boost leak, either in the flex pipe or the Wastegate. looses some boost at higher rpm.
Clear coat is peeling on the hood and the trunk
E Brake lines need to be replaced.
A few spots of rust on the exterior
Power steering rack boot is torn, leaking a bit of fluid.
Pass side CV boot is torn, no clicking.
Exhaust clamps are shot, need to be replaced. Small exhaust leak currently
Catalytic converters have been gutted due to breaking up and clogging the system.
Headliner needs to be replaced
Pass corner tail needs to be replaced, piece of glass missing.
Pass headlight needs to be replaced, has a small crack by the turn signal. Can get away without replacing it, no danger of it falling off or failing.

The car was hit on the passenger front fender at a gas station over the previous summer. Minor damage to the fender. I have a new one in pearl white that will need to be painted before putting on. I also have a hood, front and rear bumpers, and front fenders for both sides. All in pearl white. perfect condition just need to be washed and painted

I have the chrome strips for the front grille as well.

I have done my best to describe EVERYTHING about this car, if i have missed something i will be sure to edit my post.

Again OPEN TO TRADE OFFERS FOR A TRUCK, price is 4,000 OBO

Note: the shift boot is 100% fine its just not pictured in the photos as i was cleaning it
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Deanne
All Other Audi Models
5
11-25-2007 08:24 AM
Dish1guy
Intake, Headers and Exhaust
0
07-03-2006 06:57 AM
hotbigd
All Other Audi Models
2
11-25-2005 02:04 AM
tuner automotive
Archive - Vehicles for Sale
1
08-07-2005 02:13 PM
smf1670
South
0
05-22-2005 04:11 PM



Quick Reply: FS: 1991 Audi 200 20v Quattro 3B Lago Blue



All times are GMT -4. The time now is 06:20 AM.