Antifrezee & Oil for bigger turbo
#11
RE: Antifrezee & Oil for bigger turbo
ahaha
there is the list;
Elim 2871R turbo
high flow mani.
440cc inj.
inlet pipe
software (I'll ship ECu today)
rear rotors
front & rear pads
intercooler kit
Evo DV
antifreeze, some sprays for the rusted bolds, break fluit (maybe)
That's all I can think of. I dont know what I bought last week.. too many stuff to track... I lost track [&:]
there is the list;
Elim 2871R turbo
high flow mani.
440cc inj.
inlet pipe
software (I'll ship ECu today)
rear rotors
front & rear pads
intercooler kit
Evo DV
antifreeze, some sprays for the rusted bolds, break fluit (maybe)
That's all I can think of. I dont know what I bought last week.. too many stuff to track... I lost track [&:]
#14
RE: Antifrezee & Oil for bigger turbo
ORIGINAL: aRIf
ahaha
there is the list;
Elim 2871R turbo
high flow mani.
440cc inj.
inlet pipe
software (I'll ship ECu today)
rear rotors
front & rear pads
intercooler kit
Evo DV
antifreeze, some sprays for the rusted bolds, break fluit (maybe)
That's all I can think of. I dont know what I bought last week.. too many stuff to track... I lost track [&:]
ahaha
there is the list;
Elim 2871R turbo
high flow mani.
440cc inj.
inlet pipe
software (I'll ship ECu today)
rear rotors
front & rear pads
intercooler kit
Evo DV
antifreeze, some sprays for the rusted bolds, break fluit (maybe)
That's all I can think of. I dont know what I bought last week.. too many stuff to track... I lost track [&:]
#15
RE: Antifrezee & Oil for bigger turbo
[/quote]
Sounds good.. I wish I could say that I lost track of all the mods im waiting on through the mail. Do you think you will have your ecu back by Friday or Saturday?
[/quote]
They said they keep the ecu max 2 days. They will have my ecu by tomorrow and if they ship it on thursday, I'll have it by friday.
Sounds good.. I wish I could say that I lost track of all the mods im waiting on through the mail. Do you think you will have your ecu back by Friday or Saturday?
[/quote]
They said they keep the ecu max 2 days. They will have my ecu by tomorrow and if they ship it on thursday, I'll have it by friday.
#16
RE: Antifrezee & Oil for bigger turbo
Might wanna add a snub mount, and s4 motor mounts. I had a **** load to install when i got all my stuff. Plan on AT LEAST 2 days for all that stuff, unless you start at 5 in the morning and go straight through till night time. Have fun with the inlet pipe if its atps 3", lol.
#17
RE: Antifrezee & Oil for bigger turbo
ORIGINAL: trailboss
Might wanna add a snub mount, and s4 motor mounts. I had a **** load to install when i got all my stuff. Plan on AT LEAST 2 days for all that stuff, unless you start at 5 in the morning and go straight through till night time. Have fun with the inlet pipe if its atps 3", lol.
Might wanna add a snub mount, and s4 motor mounts. I had a **** load to install when i got all my stuff. Plan on AT LEAST 2 days for all that stuff, unless you start at 5 in the morning and go straight through till night time. Have fun with the inlet pipe if its atps 3", lol.
#18
RE: Antifrezee & Oil for bigger turbo
I hope it is not going to take that long. I mean I am fine if it takes one day to finish up. Goldenchild will also help us and he did these things many times. At least one of us know what really needs to be done. Cross our finders and we'll see...
*Have fun with the inlet pipe if its atps 3", lol;
Why u say that? don't make me afraid
*Have fun with the inlet pipe if its atps 3", lol;
Why u say that? don't make me afraid
#19
RE: Antifrezee & Oil for bigger turbo
well what FMIC did you get, probablly going to need to trim the bumper support, thats a pain right there and then test fitting it pulling it off again and then trimming more. You have the k03 out already, if so it will be a little quicker, but getting the coolant lines on are a bitch. The inlet pipe didn't want to work for me, the pcv valve was hard to connect to it to fit the air duct back over it but i have the evo ms intake so i really didn't need it. IS goldenchild the guy that used all the zip ties, haha, just j/k man.
Thread
Thread Starter
Forum
Replies
Last Post