i spent most of the day trying to install a full auto tt into my b5 a4 and when everything was all said and done after ready like 4 diy's it still didn't work

problem is most diy's are on greddy 3's or full auto's in a b6(http://audizine.com/forum/showthread.php?t=77568) this one

also problem, i don't have a rear ashtray with heat warmer


if someone has ran a greddy full auto in a b5 can you give a brother a hand

tia

 

all turbo timers you the same hookups:

constant 12v
acc 12v
ignition 12v
parking brake light.

with those 4 sources (no matter what for) your good to go.

 

i understand those principals, but i couldn't get the unit to power up.... i used aligator clips and it still only flickered on and off.... also after doing that and putting my stuff back together windows no worky...... so i put a fuse back in the stock location even though i left the inline fuse still in the holder


and later the next day my driver side(only ds) window was acting up

any thoughts?

 

connections could be bad. I would solder over clips

 

how can i solder onto the clips(plugs) sticking out of the back of the box


i am talking where the 4 prong plug connect to the back of the unit