Hi everyone im new here and my mates as Audi A4 Q MTM 1.8t and we installed a boost gauge today and it goes up to 17psi whcih is a lot for stockthen bleeds back down to 13psi. i dont know if its reading correct as there is not much pulled compared to my nissan skyline which as 12psi FMIC Apexi Power FC ecu with a tune which it pulled 212RWKW and my car kills his in a race.

Sowhats the best way to get more power if the boost is set that high. future mods FMIC. also the stock exhaust on it is said to be 3ich turbo back system would this be true??
alsohow do i get avag com and how to use it.im in AUS by the way

The MTM is ment to be MTM chip but i dont know??

Cheers Tom

 

bump anyone??

 

Vagcom https://www.audiforums.com/m_565488/tm.htm

For more hp get a chip and get the car tuned so that it will run properly. https://www.audiforums.com/m_391850/tm.htm

 

3" exhaust is probably overkill...

im not sure how in hell a 1.8t b6 could kill a tuned skyline???

my b6 spikes 23psi and holds 20psi on a 1+ flash

 

remember
skylines are pos sedans
gtr's are the fast ones

 

sounds like you already have the chip, i got mine a couple weeks ago, and put on a boost gauge last week, and its exactly what my boost is doing, some people say that it drops because its a small turbo, but i still think that i'm leaking from the stock DV, my forge 007 should be here either today or tomorrow, so i'll be able to varify the correct answer haha

 

The stock exhaust should be 2.25", so if it's got a 3" exhaust, that's an aftermarket setup.

 

ah thanks for the skyline bit! i wasnt thinking...

 

ok thanks for that info. let me know how the DV valve goes?? my mates getting a FMIC so i will see how that goes.

 

he is chipped, mtm is the tuning company, thats one nice car car friends got. http://www.mtm-online.de/en/index.php