fender bender quote
Thread Starter
|
1st Gear
Joined: May 2006
Posts: 78
From:
fender bender quote
04' b6 stock
after an unfortunate incident... my car is left with a ~6' vertical ~2'wide dent on the fender directly behind the rear driver-side wheel.
will try to get pics soon.
questions is..
have any of you guys had any repair on such a part?.. i just need to know if it can be popped out without poking through the body, since the dent begins right where the wheel ends, and taking out the rear wheel should give lots of clearance.
im not as concered as the paint as i am with the dent...
can you guys give me a quote/recommendation on body shop? or even a diy guide will do =P
thanks in advance.
after an unfortunate incident... my car is left with a ~6' vertical ~2'wide dent on the fender directly behind the rear driver-side wheel.
will try to get pics soon.
questions is..
have any of you guys had any repair on such a part?.. i just need to know if it can be popped out without poking through the body, since the dent begins right where the wheel ends, and taking out the rear wheel should give lots of clearance.
im not as concered as the paint as i am with the dent...
can you guys give me a quote/recommendation on body shop? or even a diy guide will do =P
thanks in advance.
4th Gear
Joined: Dec 2004
Posts: 4,540
From:
RE: fender bender quote
ORIGINAL: A4 the Quattro
1 MIIIILLLLLIIIIIOOOOON DOOLLLLARS!!! MUHAHAHA
actually i have no idea
1 MIIIILLLLLIIIIIOOOOON DOOLLLLARS!!! MUHAHAHA
actually i have no idea
OOHHHHH **** you, that was funny, I will be senndying you the bill for a new chair, that I just fell out of and broke.
4th Gear
Joined: Dec 2004
Posts: 4,540
From:
RE: fender bender quote
ORIGINAL: b6driver
04' b6 stock
after an unfortunate incident... my car is left with a ~6' vertical ~2'wide dent on the fender directly behind the rear driver-side wheel.
will try to get pics soon.
questions is..
have any of you guys had any repair on such a part?.. i just need to know if it can be popped out without poking through the body, since the dent begins right where the wheel ends, and taking out the rear wheel should give lots of clearance.
im not as concered as the paint as i am with the dent...
can you guys give me a quote/recommendation on body shop? or even a diy guide will do =P
thanks in advance.
04' b6 stock
after an unfortunate incident... my car is left with a ~6' vertical ~2'wide dent on the fender directly behind the rear driver-side wheel.
will try to get pics soon.
questions is..
have any of you guys had any repair on such a part?.. i just need to know if it can be popped out without poking through the body, since the dent begins right where the wheel ends, and taking out the rear wheel should give lots of clearance.
im not as concered as the paint as i am with the dent...
can you guys give me a quote/recommendation on body shop? or even a diy guide will do =P
thanks in advance.
man I'm really sorry for jerkinoff on your post. Panda's right thou, its really hard to estimate the cost without pics. also just run it by some body shops and get estimates.
2nd Gear
Joined: Jan 2005
Posts: 1,489
From: San Mateo, CA
RE: fender bender quote
That looks it would be tough to pop without bending the body because of the contour where the fender flattens out for the wheel well opening. I imagine you are going to have to get it pounded out, bondo'd and painted, like said above. Its not close to other panels so blending won't be a problem. Maybe $600-800?
