Audi A4 The Audi A4 model offers nimble handling and performance that makes it one of the leading cars in its class. Read more about the Audi A4 in the Audi A4 review.

FMIC INSTALLED!!! Sort of... PICS!

Thread Tools
 
Search this Thread
 
Old Nov 26, 2007 | 11:46 AM
  #31  
cincyTT's Avatar
I'm make believe
Joined: Dec 2006
Posts: 17,587
From: In my head
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

just remember if you crank up the boost, the turbo is still pushing out 3-5psi more than is making it to the manifold.

Depending on the piping and ic size, it is possible
 
Old Nov 26, 2007 | 08:08 PM
  #32  
Beer Mod's Avatar
3rd Gear
Joined: Nov 2005
Posts: 1,894
From: Mt. Shasta CA
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

ORIGINAL: ThePaintballGuy

UHHHHHH... What a long day... AND IT'S STILL NOT EVEN CLOSE TO BEING DONE!!!!

Josh
I told you the bumper was a pain in the a$$! Get some 4' cutoff wheels and go to town!!!

Ya turn the boost back up to make up for your psi drop (5psi is alot I lost 2-3). Your new FMIC will fight the heat way better then the stock smic.
 
Old Nov 27, 2007 | 12:18 AM
  #33  
Audi_Skydiver's Avatar
Thread Starter
|
4th Gear
Joined: Aug 2006
Posts: 5,769
From: Phoenix Arizona
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

OK, I am using 2 inch piping and yes it's an e-bay intercooler. I bought it from cxracing. I also do not have the mbc anymore because it was causing problems and the one I ordered from voodooboost.com never showed up and I lost $70 [:@].

I will be going to use a big cut-off wheel. I am taking a break from it tonight and will finish it tomorrow probably.

Josh
 
Old Nov 27, 2007 | 12:28 AM
  #34  
cincyTT's Avatar
I'm make believe
Joined: Dec 2006
Posts: 17,587
From: In my head
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

i would buy 2 maybe 3psi with your setup, but 5psi means something might be wrong. 2" piping and that little core shouldnt cause a 5psi drop.
 
Old Nov 27, 2007 | 12:32 AM
  #35  
Audi_Skydiver's Avatar
Thread Starter
|
4th Gear
Joined: Aug 2006
Posts: 5,769
From: Phoenix Arizona
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

Thats what I was thinking. I think I might have a boost leak because I can also hear a hissing noise. I don't know where it would be coming from though. I will have to try and find it. Oh and I found out that I have a leaky valve cover. It is leaking on my cat and smokes some. GRR... oh and my power steering fluid is low I think.

Josh
 
Old Nov 27, 2007 | 11:33 AM
  #36  
tooxtreme8813's Avatar
Senior Member
Joined: May 2006
Posts: 889
From: NJ
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

is that intercooler bar and plate or tube and fin design
 
Old Nov 27, 2007 | 11:34 AM
  #37  
cincyTT's Avatar
I'm make believe
Joined: Dec 2006
Posts: 17,587
From: In my head
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

All ebay cores are bar and plate
 
Old Dec 2, 2007 | 03:41 PM
  #38  
Audi_Skydiver's Avatar
Thread Starter
|
4th Gear
Joined: Aug 2006
Posts: 5,769
From: Phoenix Arizona
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

IT'S FINISHED!!!!

I finally got my FMIC and Bumper back on my car! WOO HOO!!!! To bad I can't drive my car now though. Stupid fuel lines.

Anyways here are some better pictures:








Oh and yes, my car is SUPER dirty!!! But it's been snowing so kind of pointless to wash.

The bumper was a PAIN to get back on. I was originally using a small dremel with a cutting disk and it took 5 min just to get through the metal crash bar! I finally pulled out my 4 inch RotoZip and threw one of those big cutting wheels and it went right through! I went through 2 cutting wheels however. LOL But it's finally on. I might go back in and cut out some of the little tabs on the bumper that you can see if you look closely or I might just leave them and get an S4 bumper sometime soon.

Josh



 
Old Dec 2, 2007 | 04:21 PM
  #39  
MrFlippant's Avatar
4th Gear
Joined: Jun 2007
Posts: 3,115
From: Des Moines
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

Looks good! +1 on the S4 bumper.
 
Old Dec 2, 2007 | 04:39 PM
  #40  
CAB509's Avatar
6th Gear
Joined: Jan 2007
Posts: 10,989
From: the Ohio State
Default RE: INSTALLING FMIC AND HAVING PROBLEMS!

looks good, sorry to hear about the other problem you have (fuel lines)


on an OT note, what lights do you have?
 



All times are GMT -4. The time now is 02:13 AM.