Mike's New Audi
Thread Starter
|
1st Gear
Joined: Dec 2006
Posts: 43
From:
Mike's New Audi
Hey everyone im new to the forum! I just got a 01Audi A4 Quattro 2.8 AWD im pretty excited and I love it. Ill post some pics asap! I had one quick question though the car did not come with an owners manual and I was wonering how to program the garage door thing. If you can help me oout that would be great thanks!
[IMG]local://upfiles/28260/108036279C7F4A8799301485B91939CE.jpg[/IMG]
[IMG]local://upfiles/28260/2E3DD30338CC4BAF806EBD1394967496.jpg[/IMG]
[IMG]local://upfiles/28260/108036279C7F4A8799301485B91939CE.jpg[/IMG]
[IMG]local://upfiles/28260/2E3DD30338CC4BAF806EBD1394967496.jpg[/IMG]
Senior Member
Joined: Jun 2005
Posts: 1,167
From: Pittsburgh PA
RE: Mike's New Audi
Welcome to the forums! Nice car and here you go..
1. Turn on the ignition switch on.
2. Simultaneously press and hold the first and third buttons and releasing only when the indicator light begins to flash after about 20 seconds.
3. Hold the end of the hand held garage transmitter about 2 inches away from the surface of the HomeLink channels while keeping the indicator light in view.
4. Simultaneously push the hand held garage transmitter and one of the HomeLink channels. Do not release until the next step is completed.
5. The HomeLink indicator light will flash first slowly, and then rapidly. When the indicator light flashes rapidly, both the button and the channel may be released.
Repeat for each of the buttons for different garages or other remote devices.
If you have a garage door with a rolling code, follow the directions below:
1. Locate and press and release the training or learning button on the garage door opener motor head unit.
2. Return to the vehicle and pres and release the programmed HomeLink channel. Press and release the HomeLink channel a second time to complete the programming process. Some garage doors openers may require you to do this procedure a third time.
1. Turn on the ignition switch on.
2. Simultaneously press and hold the first and third buttons and releasing only when the indicator light begins to flash after about 20 seconds.
3. Hold the end of the hand held garage transmitter about 2 inches away from the surface of the HomeLink channels while keeping the indicator light in view.
4. Simultaneously push the hand held garage transmitter and one of the HomeLink channels. Do not release until the next step is completed.
5. The HomeLink indicator light will flash first slowly, and then rapidly. When the indicator light flashes rapidly, both the button and the channel may be released.
Repeat for each of the buttons for different garages or other remote devices.
If you have a garage door with a rolling code, follow the directions below:
1. Locate and press and release the training or learning button on the garage door opener motor head unit.
2. Return to the vehicle and pres and release the programmed HomeLink channel. Press and release the HomeLink channel a second time to complete the programming process. Some garage doors openers may require you to do this procedure a third time.
