Shat, i slept in.. Didnt get home till 4 this morning.. Im going over to tht garage right now.. Hes got the fpr in but its doing the same crazy idle.. We are gunna take it for a spin though!!!!!

 

uve got a vacume leak then. u need a get a pressure tester and find it

 

that is what i'm thinking I was having problems with my N75 a while back and I took it right off and drove the car maybe 500 meters and it was doing the same thing

 

Bummer... its not fpr?!?! its gotta be vacum leak! check it pls i can't take this anymore. GOOD LUCK!

 

omggggggggggg ******* vacuuum!! i cant take it! PLEEEEEEEEASEEEEEEEEE

 

I just started to read this thread today and i already want you to be done this thing!! Goodluck!! almost there!

 

this is worse the chirtmas whats the news

 

ahahahha no one even close to solve the problem

Problem was the injectors. I took out the spacers and put the injectors back and BOOM! works great & great idle

We drove about 30-50 mins with onepoint8tee I was tring to lower my boost because it was going too much. we go like over 20psi couple of times and I had to let the gas go oterwise it was still going

The problem is now I cannot go over 5psi. I dont know why. I push it hard ones and we really feel the power then it did not pass 5psi and still same.

I rent a code reader and there was a missfiring code and erase it, now no code, no cel but cannot pass the 5psi

Any ideas ??? It could be limp mode ? We could not vag it, we'll do it tomorrow.

 

nevermind

 

yea you don't need spacers for them injectors, did renn-art supply them.