What do I spass the spark plugs at or dont i need to couldnt find the awnser in the mannnual

 

Not sure what you are asking?

 

you know how there is a space for the spark well i know for my atv i had to change the space were the spark ignites and i was wondering if i had to do the same for the spark plugs for my audi or do i just put them in right out of the box i got NGK laser cut platnum plugs

 

no one can help or did i not explane it very well

 

You're talking about the spark plug gap right?

http://www.bentleypublishers.com/tec...gs.replace.htm

 

Good question, im looking at new copper plugs, specifically NGK BKR7E, great plugs!!! deffinetly a neccesity for better driving and maintenance get them at sparkplugs.com.. the gappin is .032 .. well i dont kno what they recomend for stock plugs but that number is deffinetly familiar to me

 

Same gap for OEM.

 

I just put in some Bosch Doubles and they came pre-gaped. I check them again when I got home anyway and they were close enough for goverment work.

The last few people I helped with plugs all the plugs came pregapped from the dealer or if you get the right ones from the parts store they are already pregapped right. I could be wrong, in fact I might not have any clue what I am talking about on this. I have only just started to mess with the motor on this car.

But my car is running even better then ever now and I am getting the best gas milage I have ever gotten, with great throttle response. I would have to guess the plugs were gapped right or I would be fouling out and missing.

Enjoy,

 

after i found out what the gap was supposed to be i checked and they came pre gaped thanks for all the help

 

most will be pregapped if you buy what is suggested for your car. You should only need to regap them if you have aggressive programming, etc...