i just finished putting on my suspension kit. i went with h&r sport springs and bilstein shocks equipped with with ecs tuning coilover kit conversion. right now the rear is like a half inch lower than the front, i will fix this tomorrow, but what do you think i should i do when it comes to ride height???

 

IMO i like it slammed so if you dont plan on having more then two people in the back id leave the bak the height you already have it and drop the front an xtra half inch

 

if it were me, i'd raise the back up to match the front height. i absolutely despise having to worry about scraping.

 

It depends on where you live, i've got about 1" to 1 1/8" from thr top of the tire to the wheelwell, it looks great, and i dont have to worry about curbs, plowing snow, or bottoming out when i load the car up.

 

Looks good. Can you go half an inch lower?

 

drop it like its hot! you wont rub on those stockers unless the drop is too much.

 

ok, so i evened it all out, i wouldnt be able to sleep tonight knowing that i wasnt done. i lowered the front a bit more now its like less than 1/4 inch lower than the rear, i think i will leave it like this. it seems low as hell!!! but i went out on some windey roads and i dont scrape whatsoever, so im happy. ill get some more pics once i clean it up and its light outside. i still need an alignment, guess ill go have that done on monday.

 

its still gonna look fresh sandman. i cant wait to slam mines hopefully itll happen around tax time, gotta worry bout gettin the other bits and pieces taken care of

 

Exactly. I realize, after having my suspension installed for 6 months or so, that I can't take scraping anymore. It's gotten worse recently, and today I was seriously considering posting a TRADE MY KONIs for STOCK SPORT+CASH thread. It looks great the way it is, but scraping is a fvcking bastard. It isn't worth it.

 

Awwww, douible post. I will make this post count by posting this picture and making this thread NWS: