Anyone driving +350HP?
#11
RE: Anyone driving +350HP?
yeah i read that a couple times but i wanted to know prices also what else you would need cus i know if i got a gt30 the stock intercoolers won't work. so what else would i need. oh and also is there a turbo that can just replace our stock one. Elminator gt2871r does that just slap into the spot of the k0-4?
#13
RE: Anyone driving +350HP?
There is two ways to look at it. I pieced together my own kit on a budget and with doing my own work would be able to get around 325awhp for around 3k...thats with doing my own work and includes.
1. -VAG-COM
2. -wastegate
3. -oil lines
4. -ATP exhaust manifold
5. -Spearco FMIC
6. -Complete 3"Exhaust
7. -Siemens 630cc injectors
8. -Kinetics t3/t4 50 trim turbo
9. -Walbro 255lphr Fuel pump kit
10. -unitronics software
11. -Bentely Repair manual
Keep in mind I got some things free linke the FMIC and friends doing exaust and FMIC piping
And that was my original list. Since then I have added Scat rods, APR intake mani, Water/meth injection, and GReddy Profec e-01 electronic boost control. I have bought/sourced all these parts in the last month or so and hope to be done within the next week or two and since have a bit higher goal now that I added water/meth, rods, and intake
1. -VAG-COM
2. -wastegate
3. -oil lines
4. -ATP exhaust manifold
5. -Spearco FMIC
6. -Complete 3"Exhaust
7. -Siemens 630cc injectors
8. -Kinetics t3/t4 50 trim turbo
9. -Walbro 255lphr Fuel pump kit
10. -unitronics software
11. -Bentely Repair manual
Keep in mind I got some things free linke the FMIC and friends doing exaust and FMIC piping
And that was my original list. Since then I have added Scat rods, APR intake mani, Water/meth injection, and GReddy Profec e-01 electronic boost control. I have bought/sourced all these parts in the last month or so and hope to be done within the next week or two and since have a bit higher goal now that I added water/meth, rods, and intake
#15
RE: Anyone driving +350HP?
Water/meth will help you pull timing and cool the system helping the turbo to work more efficiently and help to raise boost. I have read lots of good stuff about it and have no first hand experience so can't say for sure much more than that.
#17
RE: Anyone driving +350HP?
It takes alot more than an eliminator to run 350+ hp..... Im running 365 awhp on pump 93 @ 25........ if your talking about 350+pump and 350+ on race its two diff things......gt30r or bigger is what your going to need.....
#20
RE: Anyone driving +350HP?
PagParts......talk to arnold....... for a 225 TT its 4500.00 for complete kit...... includes gt3076 external gate setup...vbanded....with eurodyne 630cc tune.....you would have to supply exhaust and fmic and rods Contact 1552v2 as well they have done alot of 225TT's since i was there: )