braided vacuum hose size?
 

What's the size of the braided vacuum hose under/around the intake?

Thanks!

RE: braided vacuum hose size?
 

3.5mm

RE: braided vacuum hose size?
 

Get tons of that and 6mm so you can change just about anything you need to

RE: braided vacuum hose size?
 

I just ordered 25' of 3.5mm, 15' of 6mm, and 15' of 8mm.

All in high temp platinum silicone (color = silver)

RE: braided vacuum hose size?
 

Where did you order yours from. What was the grand total for that? Also did you need that much or did you just wanna make sure you had enough?

RE: braided vacuum hose size?
 

That should be more than enough

RE: braided vacuum hose size?
 

would 10 feet of each be enough?

RE: braided vacuum hose size?
 

you need to cover all of this

http://monty.syr.edu/vw/20vforum/AWDVacDiag.gif

1 - Vent line
From gravity valve at fuel tank See "Fuel Tank, Removing and Installing" item no 8. See: Fuel Tank\Service and Repair
2 - EVAP canister
With Evaporative Emission (EVAP) canister purge regulator valve -N80-
3 - Turbocharger
4 - Check-valve
For EVAP canister system
5 - Pressure unit
For Boost Pressure Regulation Valve
6 - Deceleration shut-off valve
7 - Wastegate bypass regulator valve - N75
Valve is activated (pulsed) by the Engine Control Module (ECM)
Checking activation: See Output Diagnostic Test Mode (DTM), activating. Refer to "On Board Diagnostic". See: Computers and Control Systems\Testing and Inspection
8 - Brake booster
9 - Check-valve
For brake booster
10 - Air filter with Mass Air Flow (MAF) sensor - G70 -
11 - Pressure control valve for crankshaft housing ventilation
12 - Combination valve
For Secondary Air Injection (AIR) system
Checking. See: Emission Control Systems\Air Injection\Testing and Inspection
13 - Fuel pressure regulator
14 - Check-valve
15 - Recirculating valve for turbocharger -N249-
16 - Secondary Air Injection (AIR) solenoid valve -N112-
Checking. See: Emission Control Systems\Air Injection\Testing and Inspection
17 - Crankcase ventilation
18 - Check-valve
For EVAP canister system
19 - Charge air pressure sensor -G31- / charge air cooler
20 - Secondary Air Injection (AIR) pump motor - V101 - *
Checking function. See: Emission Control Systems\Air Injection Pump\Testing and Inspection
21 - Vacuum reservoir


So i would go with more than 10'

RE: braided vacuum hose size?
 

hightempsilicone.com

I opted for that much to ensure I had plenty to spare.
$85 shipped

RE: braided vacuum hose size?
 

Cool thanks guys, where did you get your silicone hoses?