want to replace the turbo on my tt, it is a 2000 model with a awp engine, but dont know if it is easier to take the engine out or to do it from the top or bottom. if you have subjections let me know and if have pics let me know!! thanks

 

lol no need to remove the engine... were not driving s4's

 

you just need access to above and below the engine. thats it

 

its a pain in the a$$ let me tell ya, rusty bolts are a B*tch 1/2

 

PB Blaster is a wonderful tool

 

Normally My vote goes for BFH with a side of PB Blaster.

But it's tight in there, No BFH's Allowed.

 

They arent tq down to tight, you just need the PB B eat away the rust. If people still cant get it, get a longer socket wrench

 

as long as there not as stuck on as the axle nut on my GT is lol. I actually jacked the front end car up using the breaker bar and even with the entire weight of the front of the car pushing against the nut its still on there [:@]

 

Time to find a buddy with an air gun.... god i want one myself

 

Make me an intercooler and i'll buy you a new one with a 26 gallon compressor!