For Sale/Trade Thread.
3rd Gear
Joined: May 2008
Posts: 1,612
From: south florida
audi TT hood with a hole in it
My car was vandalized. my hood has a hole in it the size of a nickle. it also has some lite scratches, but is a great candidate for a boser hood. the damage is very fixable, and only went through the outside skin of the hood. the inside is still perfect. these hoods sell for $924 from the dealer because they are all aluminum. And no one makes an aftermarket replacement. taking offers
1st Gear
Joined: Mar 2008
Posts: 21
From: angola/buffalo ny
FS: H&R Sport Spring Set
FS: H&R Sport Spring Set, off of my 2001 TT Quattro 225. Approx 5000 miles on them. i just installed some coilovers on my car. looking for $150 shipped, $230 when purchased new. PM me if intrested
Last edited by drunkenpenguin49; Feb 12, 2010 at 11:49 AM.
1st Gear
Joined: Feb 2010
Posts: 51
From: Phoenix, AZ
Looking for an OEM window switch to operate the window on an Mk1 TT, anyone got anything or know anyone parting out a TT?
Email rich.earheart@yahoo.com
Email rich.earheart@yahoo.com
1st Gear
Joined: Feb 2010
Posts: 53
Junior Member
Joined: Mar 2009
Posts: 26
FS: 180 FWD Parts
Stuff for sale.....need gone ASAP!!!!!
1. Forge Silicone Intake Hose Red $75 plus shipping
2. Forge Silicone TB/IC Hose Red $75 plus shipping
3. APR FMIC with all piping and couplers $350 plus shipping
4. ECS Red Lightweight/UD Pulleys (MK44CPK) New Used $150 shipped
5. ECS Coil Pack Hold Down Kit - Red ( ECS42725KT) New Used $35 shipped
6. OSIR DTM Valance Gloss Carbon (TTM1-DTMV-CF) $200 plus shipping
If interested send me a e-mail to cvsmightymouse24@aol.com
1. Forge Silicone Intake Hose Red $75 plus shipping
2. Forge Silicone TB/IC Hose Red $75 plus shipping
3. APR FMIC with all piping and couplers $350 plus shipping
4. ECS Red Lightweight/UD Pulleys (MK44CPK) New Used $150 shipped
5. ECS Coil Pack Hold Down Kit - Red ( ECS42725KT) New Used $35 shipped
6. OSIR DTM Valance Gloss Carbon (TTM1-DTMV-CF) $200 plus shipping
If interested send me a e-mail to cvsmightymouse24@aol.com
1st Gear
Joined: Nov 2007
Posts: 433
From: Niles, MI
Hey guys, I am in the position to sell/trade these wheels. They are 19 BBS reps, 19x8 up front and 19x10 in the rear. Shoot me some offers as I am open to different options, whether cash or a trade. I'm looking for something like a lightweight 17/18in.
I've had them on for about 5 weeks last season and 1 week this season. I am the second owner. Previous owner had these refinished and they are perfect EXCEPT for a small line of curbage on the edge of the rim... about an 1inch or so long (pics to follow)
Tires are Nankang. 275/30/19 rear, 235/35/19 front.
They all hold air. The rears are a bit worn on the inside, maybe from previous owner's camber issues?
THE BAD:
The driver's rear HAS A NAIL IN THE EDGE OF THE TREAD NEAR THE SIDEWALL. I acquired this nail last season and drove for 2 weeks with it in the tire. The tire in question held 30psi all winter in my closet, and have held for the week that I have ran them this season.
Passenger side rear HAS SOME SLIGHT GROOVES on the very outside of the tread where my fender has rubbed from hitting bumps. (car is lowered about 1 in) Nothing to cause loss of air, but something I wanted to be known. You can almost see them in the below pic.
Front passenger center cap is gone.
Keep in mind that most of us replace tires when buying used wheels anyway. They do not NEED replacing but that will be your call. Remember, I've ran them this way for about 2 months with no issues (just have to keep an eye on that rear with the nail in it)
They are Nankang's anyway, I'm sure someone would want to replace them with a higher quality set of rubber
Pics below. The wheels are on my TT right now, I will get a shot of the slight curbage when I can.
FWIW, The rears have no spacers and the fronts have a 3mm spacer. Check the stance. It's pretty powerful when seen in person.
Modified by taifighter at 8:13 AM 3/25/2010
I've had them on for about 5 weeks last season and 1 week this season. I am the second owner. Previous owner had these refinished and they are perfect EXCEPT for a small line of curbage on the edge of the rim... about an 1inch or so long (pics to follow)
Tires are Nankang. 275/30/19 rear, 235/35/19 front.
They all hold air. The rears are a bit worn on the inside, maybe from previous owner's camber issues?
THE BAD:
The driver's rear HAS A NAIL IN THE EDGE OF THE TREAD NEAR THE SIDEWALL. I acquired this nail last season and drove for 2 weeks with it in the tire. The tire in question held 30psi all winter in my closet, and have held for the week that I have ran them this season.
Passenger side rear HAS SOME SLIGHT GROOVES on the very outside of the tread where my fender has rubbed from hitting bumps. (car is lowered about 1 in) Nothing to cause loss of air, but something I wanted to be known. You can almost see them in the below pic.
Front passenger center cap is gone.
Keep in mind that most of us replace tires when buying used wheels anyway. They do not NEED replacing but that will be your call. Remember, I've ran them this way for about 2 months with no issues (just have to keep an eye on that rear with the nail in it)
They are Nankang's anyway, I'm sure someone would want to replace them with a higher quality set of rubber
Pics below. The wheels are on my TT right now, I will get a shot of the slight curbage when I can.
FWIW, The rears have no spacers and the fronts have a 3mm spacer. Check the stance. It's pretty powerful when seen in person.
Modified by taifighter at 8:13 AM 3/25/2010