B5 Models Please discuss all 1996 - 2001 B5 A4 topics here...

High RPM even at IDLE

Old Sep 23, 2008 | 03:21 AM
  #1  
alinux's Avatar
Thread Starter
|
1st Gear
Joined: Aug 2007
Posts: 50
Default High RPM even at IDLE

Hi
My car randomly displays high rpm and the motor just roars even when the car is idling. The rpm goes up to almost 2 and it stays there other times it stays at roughly 1.2
Any hints ?
Thanks
 
Old Sep 23, 2008 | 03:24 AM
  #2  
alinux's Avatar
Thread Starter
|
1st Gear
Joined: Aug 2007
Posts: 50
Default

subscribing to my own tread
 
Old Sep 23, 2008 | 11:46 AM
  #3  
jrock's Avatar
Senior Member
Joined: Jul 2007
Posts: 282
From:
Default

mine does the same thing occassionally but its only as i am starting it up. wish i could give you more info but i havent even checked into it yet.
 
Old Sep 23, 2008 | 01:49 PM
  #4  
A4speed's Avatar
Senior Member
Joined: Jan 2006
Posts: 2,646
From: Orem, UT
Default

when its cold out, my car idles at 1200 rpms for a minute or so, then it goes back down to 800.
 
Old Sep 23, 2008 | 02:28 PM
  #5  
ricoxxx's Avatar
1st Gear
Joined: Sep 2008
Posts: 33
From: Chicago, IL
Default

My guess: engine idle control valve broken... replace or clean.
 
Old Sep 23, 2008 | 03:35 PM
  #6  
alinux's Avatar
Thread Starter
|
1st Gear
Joined: Aug 2007
Posts: 50
Default

Ricoxxx ..I did change the control valve...still same issue...I was told it might be related to some air input unit below the grear clutch...passing to much air into the motor...is this possible ?
 
Old Sep 23, 2008 | 03:56 PM
  #7  
onepoint8tee's Avatar
Site Moderator
Joined: Sep 2005
Posts: 13,664
Default

Yr? Engine? Don't replace anything without verifying voltages and resistance first. Could be a vac leak, gunked up throtle plate, maf or something else. Got a CEL? Scanned for fault codes?
 
Old Sep 23, 2008 | 04:00 PM
  #8  
alinux's Avatar
Thread Starter
|
1st Gear
Joined: Aug 2007
Posts: 50
Default

2.6 1996, will get no CEL ...will scan for fault codes.
 
Old Sep 26, 2008 | 05:29 PM
  #9  
alinux's Avatar
Thread Starter
|
1st Gear
Joined: Aug 2007
Posts: 50
Default

Hi
My mechanique had the control valve and the coils changed and it still happens...it appears most when I am driving and the rpm is at 2 then I reach a red light I stop and step on break and on the gear clutch and the rpm just stays at 2 or 1.5 and it just stays there even if I remove my foot from the clutch.
 
Old Sep 26, 2008 | 10:28 PM
  #10  
acetrebo's Avatar
4th Gear
Joined: Nov 2005
Posts: 3,393
From: Columbus Ohio
Default

Have you tried cleaning out the throttle body, or checking to make sure the airfilter is clean?
Any codes coming up at all?
 

Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:05 AM.