(2000 A6 2.8) so the short version is that I was running with the intake temp sensor code for a while until I did some research and saw that the mechanic did indeed have the temp sensor (blue?) plug and the gray plug swapped (after having the intake off for some work). I swapped them back and that solved the intake temp code. Now I am getting P1476. My question is simple.....is there something in that general area that I could have "pinched" or loosened that would likely result in this code? All I did was remove engine cover, swap the 2 plugs and reinstall cover. Just looking for easy things to test before I go digging in the wheel well for the LDP.

thanks!