Where do I put the sea foam in?!?! the one pic is to close up I don't know where the little thing is....





This is the pic that's too close up....

 

the vacuum line from the FPR to the manifold

 

Only the one line? Or both the line that goes into the PPR and the one that dissapears under the manifold?

 

remove the one blue line at the top of the "T" and run it throught there, i pretty sure any how, on the 1.8t the FPR connects to the manifold

 

I have lost my light, but is anyone sure that this is the line to run it to? Do you think someone could circle and post... I bet it would help every 2.8 owner wanted to Seaform, seeing as the only other thread on Google I can find about it has all dead picture links.

 

https://www.audiforums.com/m_848378/tm.htm

http://www.audizine.com/forum/showthread.php?t=201324



There's that post too, and none of them tell the poster where the vacuume line takes in.... Has any 2.8 owner actually done this?

 

I have. It's exactly in that second pic. If that "nipple" doesn't have vacuum try the other right next to it.

 

On my car, and I have a 12v not a 30, there is no line that has a clamp down fitting on it like that.... Could they be different?

 

mine didnt have vacuum in the line previously selected, so as trey said, use this one if yours is suck-less

 

The bottom picture, is the 30v only.... Does anyone know where it's at on the 12v? Is there anyway to just find it myself, and I'll post the pics...? A buddy said just take them all off and put the Seafoam in any line that's sucking? Is that dangerous to do? Sorry to drill the forums...