Power window switch logic
#1
Power window switch logic
Hi, new to the forum with a wierd question right from the top. Full disclosure, I am not an owner, but like the cool parts so I am using some for a street rod.
If I am not wanted here, I understand,but I am at wit's end and looking for some help. Here goes...
I have an 2003 A4 arm rest with power window switch that I would like to use. The switch that I have has 4 connectors but the mating harness only has 3 wires. I added the 4th wire hoping to gain connectivity between 2 pairs of wire, one pair in the up position the other pair in the down position. I only have connectivity in the down window position.
My next step is to tear apart the switch to see how it works, but I know that I will ruin it in the process.
Can anyone help me with the logic of this switch?
If I am not wanted here, I understand,but I am at wit's end and looking for some help. Here goes...
I have an 2003 A4 arm rest with power window switch that I would like to use. The switch that I have has 4 connectors but the mating harness only has 3 wires. I added the 4th wire hoping to gain connectivity between 2 pairs of wire, one pair in the up position the other pair in the down position. I only have connectivity in the down window position.
My next step is to tear apart the switch to see how it works, but I know that I will ruin it in the process.
Can anyone help me with the logic of this switch?
Thread
Thread Starter
Forum
Replies
Last Post
ima_slap_joO
All Other Audi Models
0
05-31-2008 09:55 PM
peterock29
Archive - Interior/Electrical/Stereo
0
01-16-2008 03:59 PM