92 100c 2.8L serp belt routing help please
#1
92 100c 2.8L serp belt routing help please
I've recently purchased a 92 audi 100s, for my girlfriend. When i got the car the serp belt wasn't on the car. I've replaced the timing belt/water pump/thermo, and now have the car almost back together. I just need the routing of the belt. if anyone has a diagram that would be great.
92 audi 100s
2.8L V-6
Automatic
Car has A/c
Seems to be the origional tensioner, there is a plastic pully on the drivers side that seems to just be a fixed pully that doesn't power anything, so i'm assume'n it hasn't been upgraded yet.
P.S. it's our first Audi
92 audi 100s
2.8L V-6
Automatic
Car has A/c
Seems to be the origional tensioner, there is a plastic pully on the drivers side that seems to just be a fixed pully that doesn't power anything, so i'm assume'n it hasn't been upgraded yet.
P.S. it's our first Audi
#4
RE: 92 100c 2.8L serp belt routing help please
basically from the alternator, up over the big top pully, down around A/C, over to around the crank, than wrap back around the other two pullys to get back to the alternator. good luck
Thread
Thread Starter
Forum
Replies
Last Post
Jeffla
Audi A6
7
01-03-2010 04:43 AM