2000 Audi A6 Quattro 4.2L V8

I don't have a lable and there is no diagram in the manual showing how the vaccum hoses go.

I have one hose coming from the front (towards the driverside headlight in front of the tire) Blue bottle thingy. It comes from that blue bottle in the wheel well, going over the timingbelt cover and I connected it to a "Y" joint. From that "y" joint it splits one short hose going to the front assembly of the throttle body(I havent touched that configuration). The other one is longer, and I have it going stright back along the driver side fuel injector rail and I put another "Y' Joint in that spot behind the Driver side valve cover. From this "y" joint I have one hose Running towards another "blue bottle behind the wheel well in the back of the front tire on the drivers side(hidden). The other hose I stuck into a black solenoid looking thingy on the fuel injection rail. From that fuel injector rail black thingy, I ran a hose going to the back of Valve cover on passenger side, and From the second "Y" joint I mentioned I put another hose Going to the back of Driver side. valve cover. I pugged them into this egr valve looking thingy in back of the head. I don't know how the hoses go. Can someone please upload a photo or a diagram. I asked this question a few days ago but no response yet. There has to be someone in here with the same car, or I must own a rare model.

 

I think a picture would help greatly!