General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Programming 96 IR key ???

Thread Tools
 
Search this Thread
 
  #1  
Old 11-23-2005, 06:45 PM
stingraymax's Avatar
1st Gear
Thread Starter
Join Date: Nov 2005
Posts: 7
Default Programming 96 IR key ???

I need to reprogram my Ir key from my 96 A6. It is the non switchblade key with one button and IR operated.
I searched the forum but can only find the notes for frequency operated key's.

Can somebody help me here.

Thanks
Stef
 
  #2  
Old 11-23-2005, 07:00 PM
Join Date: Nov 2005
Location:
Posts: 12,826
Default RE: Programming 96 IR key ???

age and engine size
 
  #3  
Old 11-23-2005, 07:01 PM
Join Date: Nov 2005
Location:
Posts: 12,826
Default RE: Programming 96 IR key ???

forget the age cough
 
  #4  
Old 11-23-2005, 07:04 PM
stingraymax's Avatar
1st Gear
Thread Starter
Join Date: Nov 2005
Posts: 7
Default RE: Programming 96 IR key ???

it's a 2.5 TDI
 
  #5  
Old 11-23-2005, 07:12 PM
Join Date: Nov 2005
Location:
Posts: 12,826
Default RE: Programming 96 IR key ???

#1

[IMG]local://upfiles/12092/A3F63C5ADC33453982BF4CACAD54EA4F.jpg[/IMG]

[IMG]local://upfiles/12092/E70470DA62C841A4B4EEC9DA022B6745.jpg[/IMG]
 
  #6  
Old 11-23-2005, 07:13 PM
Join Date: Nov 2005
Location:
Posts: 12,826
Default RE: Programming 96 IR key ???

#2

[IMG]local://upfiles/12092/2E979355CB8D45979D70E82E70C4F318.jpg[/IMG]
 
  #7  
Old 11-23-2005, 07:18 PM
Join Date: Nov 2005
Location:
Posts: 12,826
Default RE: Programming 96 IR key ???

the foot stool was sewn by my sister
 
  #8  
Old 11-23-2005, 07:22 PM
stingraymax's Avatar
1st Gear
Thread Starter
Join Date: Nov 2005
Posts: 7
Default RE: Programming 96 IR key ???

THANKS
 
  #9  
Old 11-23-2005, 07:27 PM
Join Date: Nov 2005
Location:
Posts: 12,826
Default RE: Programming 96 IR key ???

 
  #10  
Old 11-24-2005, 08:10 AM
stingraymax's Avatar
1st Gear
Thread Starter
Join Date: Nov 2005
Posts: 7
Default RE: Programming 96 IR key ???

Well I tried to reprogram the key several times today without any luck.

This is how I did it

1. service key in contact and turn ignition on
2. lock doors with key that needs programming
3. push remote once ( horn sounds once )
4. wait 6 sec.
5. push remote again (door unlocks )
6. turn off ignition and remove key ( all within 30 sec )

this should have programed the key but when I trie the key nothing happens, there are fresh batteries in it so...

Anybody have any ideas ?

Thanks,
Stef
 


Quick Reply: Programming 96 IR key ???



All times are GMT -4. The time now is 10:42 AM.