remote control
4th Gear
Joined: May 2004
Posts: 4,078
From: Northern NJ USA
4th Gear
Joined: May 2004
Posts: 4,078
From: Northern NJ USA
RE: programming a remote control
The following instructions are to reprogram your switchblade key fob.
1. Take a spare key and insert it into the ignition. Turn it one click forward.
2. Roll down your window just in case. Step outside the car, and lock the car with a second key.
3. With your second key fob press the unlock button. The lights should flash.
4. Now lock the car with the key fob, and then unlock it.
5. Remove the key from the lock and the key from the ignition, and try it's function.
1. Take a spare key and insert it into the ignition. Turn it one click forward.
2. Roll down your window just in case. Step outside the car, and lock the car with a second key.
3. With your second key fob press the unlock button. The lights should flash.
4. Now lock the car with the key fob, and then unlock it.
5. Remove the key from the lock and the key from the ignition, and try it's function.
Thread
Thread Starter
Forum
Replies
Last Post
2001, a4, a6, audi, control, keys, mz24108194, program, remot, remote, remotecontrol, reprogram, roll, switchblade, window
