Finally got around to upgrading my interior lighting in my Audi A3(8p) to LED Superwhite bulbs and I have never been happier. I considered using xenon gas super whites however I made the choice to go with LEDs. After doing hours of research, I couldnt really find anything comprehensive about Audi owners doing this upgrade. What I got were bits and pieces of information from various forums so I decided to do my own RnD and overcome the challenges of this project.

To see the DIY Guide Click Here ==> http://tadasauce.wordpress.com/2009/...rior-lighting/

 

Hey, i replaced my visor light, and the holder is loose i dont know why, how do i have to bend the metal part because it was hard to take out, later when i put it back in , it is loose and dangling a little, also the driver side visor led does not come on, i know sometimes you have to drive or wait for a while for the circuit to reset or something that happened to me with another light. please reply thanks