Code Help Please...
Thread Starter
|
1st Gear
Joined: May 2006
Posts: 29
Code Help Please...
throwing 00797-g107 photo sensor
00302-j106 solonoid valve relief
18036-p1628 data-bus pwr train missing message from steering sensor
01044-control unit incorrectly coded
18256-p1848 check dtc mem of engine ecu
18057-p1649 data bus power train missing mess from abs
also another code that says exceeded boost pressure
could any of these be related? steering column has been replaced, ignition has been replaced. this is on a b5 s4 with 6 speed w esp. modulemasters say they don,t do a rebuild on this abs unit. any help is appriciated!
00302-j106 solonoid valve relief
18036-p1628 data-bus pwr train missing message from steering sensor
01044-control unit incorrectly coded
18256-p1848 check dtc mem of engine ecu
18057-p1649 data bus power train missing mess from abs
also another code that says exceeded boost pressure
could any of these be related? steering column has been replaced, ignition has been replaced. this is on a b5 s4 with 6 speed w esp. modulemasters say they don,t do a rebuild on this abs unit. any help is appriciated!
Thread
Thread Starter
Forum
Replies
Last Post
