130k all dealer maintained, timing belt and all other services done no mods yet, surprisingly the turbos still pull strong and no tears in the tbb lol, gonna change all the fluids tbb and put in some bosch 710 and then let the fun begin, one quick question can i replace the stock k03s with k04s and run for a while without fuel upgrades or will it run lean, oh and the alacantera was very dirty in this car found the best way to clean it is some 320 grit sandpaper and a small suede brush worked wonders i'l post some more interior pics
thank you

 

Congrats on the purchase, Hope you have fun with the detailing. lol I know I do. Is it aTip or Manual?

 

Hey nice car, gotta love the Alcantara. Don't take my word on this, but I think you can put some K04s in there are just get it tuned to run right. I'm not 100% sure though. Just search through this site and I'm sure you'll find something that tells you what you can do. Congrats!

 

its the 6spd, did a 4 stage cleaning on it yesterday, polish, glaze fmj-acrylic jacket and then hand laid some pure p21 carnuba took about 3 hrs but worked onders on the paint, its amazing how many imperfections a good glaze can fill. i dont know if its ok for me to post this, if not mods feel free to take it downbut theres a great place called detailedimage,com that goes into every little detail when it comes to car cleaning also have greast forums to and great stuff, i personally use the menzerna stuff straight from germany

 

nice car. You should look up the clear corner mod, makes the car look better in my opinion. And yes you can buy K04's without doing a complete fueling overhaul, you just need the k04's, fitting hardware, GIAC tune, and a 5bar fpr.

 

is it just me or does the bottom piece for the rear seat not look correct? imgiht just be on crack again but idk just looks wierd.

Yea stage 3-, K04's and hardware, tune, and larger FPR doesnt have to be 5bar but usually is...

 

Nice.

I would NOT use sandpaper on the interior. A damp cloth & some carpet cleaner will work wonders.

Yes, you can "just" put in the K04's, but you kind of need a little bit more...
2 K04's
K04 inlet pipes
turbo hardware

You can Lemi the car for more fuel, but it may not be enough, so I would purchase the GIAC STGIII- software, that comes with a FPR that will fun just fine.
It's about 30hrs of labor to swap the turbo's.

 

lol well i did try the soap and water to no avail and i know on suede sandpaper works wonders, i wish i had taken some before pics after all it is white alacantera with 130k coffee and cola stains came right out but it looks brand new now and it worked perfectly, to each his own i suppose lol

 

ive read and searched and cant seem to figure out what the lemi tweak is, anyone care to enlighten me?
thank you

 

you have my favorite interior and exterior combo... i'm so jealous

congrats man