Vagcom
1st Gear
Joined: Jul 2009
Posts: 50
So that's where i read it ... lol , remembered reading it, couldn't remember where
what can i say, it was a loong day.
BTW it works great cheers for that
what can i say, it was a loong day.BTW it works great cheers for that
Member
Joined: Jul 2009
Posts: 65
3rd Gear
Joined: Dec 2008
Posts: 1,941
From: IL
chefro: I don't know about you, but i have to try a good 5-10 times before getting it to notice that i am using a 'registered' version using the method that i posted. I leave the command windows up (so i stack up like 5-10 of them all doing my bidding) and eventually it goes through. The problem is because of the timing of when it checks for it and when it copies them; i haven't bothered changing the timeout (which is set to 1sec), but that probably would help reduce the number of tries required.
Being that you can connect to your car, then you just have to try to get the program to work. Also note that you should run the .bat as administer because you are replacing files in program files. I'm confident that it should work because there just isn't any reason why it shouldn't. My friend's '98 A4 won't connect at all (he can look at one module), so at least you don't have his problem. So again: i get the message that says "...Requires VAG-COM to be Registered..." all the time, i just have to be persistent with the program (it's most definitely not perfect) and load it a bunch of times.
xewax: i don't think you can do that
Being that you can connect to your car, then you just have to try to get the program to work. Also note that you should run the .bat as administer because you are replacing files in program files. I'm confident that it should work because there just isn't any reason why it shouldn't. My friend's '98 A4 won't connect at all (he can look at one module), so at least you don't have his problem. So again: i get the message that says "...Requires VAG-COM to be Registered..." all the time, i just have to be persistent with the program (it's most definitely not perfect) and load it a bunch of times.
xewax: i don't think you can do that
I'll try your scripts method route over the weekend.
By the way, I noticed it maintains the same port (COM2 in my case) everytime when I open it IF I plug it in the same USB port.
I would assume I would just have to keep opening and closing the program until I see "Registered" under the "About" tab, without doing any further scanning or testing.
Would this be a fair assumption?
THANKS for your input!
1st Gear
Joined: Jul 2009
Posts: 23
From: San Jose, CA
Try this.. works for me all the time...
http://forums.audiworld.com/showthread.php?p=15401625
Follow instructions carefully and use the above .bat file as that is the key to using the software
http://forums.audiworld.com/showthread.php?p=15401625
Follow instructions carefully and use the above .bat file as that is the key to using the software
2nd Gear
Joined: Aug 2008
Posts: 695
From: New England
it doesn't work 100%, you have to try it a bunch of times before it works - it's better than nothing though. it's all about the the time when the program checks for the files and whether or not the script has replaced them yet.
Member
Joined: Jul 2009
Posts: 65
I wish i could use all functions of this soft. Is that ok that i see black window when i launch cracked soft? like command prompt window.
I believe some one has bought full version of this soft so maybe its possible to upload one for all?
I believe some one has bought full version of this soft so maybe its possible to upload one for all?
2nd Gear
Joined: Mar 2009
Posts: 1,227
From: New York
I bought the one from Ross-Tech. Believe me I'm Cheap and I shop around but I have no patience for inferior B/S from parts that speak Chinese to my already effed up Vista.
I need my crap to work out of the box.
