HID Conversion Kits - ONLY $200 - FREE SHIPPING!
Senior Member
Joined: Jun 2005
Posts: 1,167
From: Pittsburgh PA
RE: HID Conversion Kit - BULB OUT FIX
ORIGINAL: AAudiA6
Well I've figured how to fix the bulb out message that displays on our cars once you install this kit. I've attached a write up picture diagram on how to fix this problem. *SEE ATTACHMENT BELLOW*
The hook up takes about an hour, the hardest part is locating the location for the ignitors. It took me long time to play with resistors to find out what exactly works. The kit/lights look great, and I'll post some pics too...
See attachment, good luck
P.S. Visionbulbs, you better hook me up with a discount on my next kit or bulb set for helping people with your KIT
Well I've figured how to fix the bulb out message that displays on our cars once you install this kit. I've attached a write up picture diagram on how to fix this problem. *SEE ATTACHMENT BELLOW*
The hook up takes about an hour, the hardest part is locating the location for the ignitors. It took me long time to play with resistors to find out what exactly works. The kit/lights look great, and I'll post some pics too...
See attachment, good luck
P.S. Visionbulbs, you better hook me up with a discount on my next kit or bulb set for helping people with your KIT
Site Moderator
Joined: Feb 2006
Posts: 2,349
From: minnetonka
RE: HID Conversion Kit - BULB OUT FIX
Can you clarify which bulb type i would need for a foglight HID conversion.. I have the 2002 s4.. And i think its a h7.. But i was looking on sylvanias guide and they say h11. I dont think thats right..??
Thread Starter
|
1st Gear
Joined: Oct 2006
Posts: 104
From:
RE: HID Conversion Kit - BULB OUT FIX
ORIGINAL: sooks
Can you clarify which bulb type i would need for a foglight HID conversion.. I have the 2002 s4.. And i think its a h7.. But i was looking on sylvanias guide and they say h11. I dont think thats right..??
Can you clarify which bulb type i would need for a foglight HID conversion.. I have the 2002 s4.. And i think its a h7.. But i was looking on sylvanias guide and they say h11. I dont think thats right..??
Can anyone clarify?
Senior Member
Joined: Oct 2006
Posts: 844
From: Boston, MA
RE: HID Conversion Kit - BULB OUT FIX
got some OK pics the other night with my 6000k that I got from vision bulbs...I need to adjust my beams. I think I have to do this via comp? anyone familiar with adjust s4 lights?
here are the pics
here are the pics
Senior Member
Joined: Oct 2006
Posts: 844
From: Boston, MA
RE: HID Conversion Kit - BULB OUT FIX
the other night I also manually adjusted my low beams to aim higher (they were aiming way too low). they are perfectly level now and look real good. no one flashes me from the otherside of the road, so that is nice.
p.s. the pics i took are now considered outdate, i'll try and post up some photos that have the adjusted lights.
p.s. the pics i took are now considered outdate, i'll try and post up some photos that have the adjusted lights.
1st Gear
Joined: Jan 2006
Posts: 142
From: Greenville, SC
RE: HID Conversion Kit - BULB OUT FIX
Can someone help me and let me know here you mounted the balast during your install? I have a B6 A4 and I don't see anyplace to mount these things. Looks like the factory location is underneath the headlight but the balasts are too thick and too wide to fit in there.
HELP!
HELP!
Senior Member
Joined: Oct 2006
Posts: 844
From: Boston, MA
RE: HID Conversion Kit - BULB OUT FIX
umm you can pretty much mount it anywhere, i know the visionbulbs ballast has a black holder that can be screwed in just by bending the top tab and putting a nut and bolt through it. if you can find any place that will hold this ballast casing that allows you to attach it/hang it then you should be fine. my stock ballasts were larger and thinner but my new ones fit right in the old one.