Blower Motor Resistor

May 21, 2012

7

0

Description:
Picutures of removing glove box on 98 A6 and replacing blower motor resistor

Read more »

Old blower resistor motor. (yellow is junkyard markings).

Old blower resistor motor. (yellow is junkyard markings).

0 2012/05/21 19:58:15 Euge82

Blower motor resistor. Remove part, then pinch plug, gently work loose. Put plug in new resistor. Slide right side in place, screw holding screw back in.

Blower motor resistor. Remove part, then pinch plug, gently work loose. Put plug in new resistor. Slide right side in place, screw holding screw back in.

0 2012/05/21 19:51:53 Euge82

Glove box lowered. Did not need to remove any trim panels.

Glove box lowered. Did not need to remove any trim panels.

0 2012/05/21 19:51:53 Euge82

There are three screws along top. Open glove box door. This is the left and center screw. Two screws are under glove box on left and right side. Note NOT the hinge screws, leave those.

There are three screws along top. Open glove box door. This is the left and center screw. Two screws are under glove box on left and right side. Note NOT the hinge screws, leave those.

0 2012/05/21 19:51:53 Euge82

Blower motor resistor motor. Holding screw loosened.

Blower motor resistor motor. Holding screw loosened.

0 2012/05/21 19:43:02 Euge82

Glove box lowered. 5 screws removed. No need to take all the way out. Can put a paper towel roll on floor to support.

Glove box lowered. 5 screws removed. No need to take all the way out. Can put a paper towel roll on floor to support.

0 2012/05/21 19:43:02 Euge82

Glove box lowered.

Glove box lowered.

0 2012/05/21 19:43:02 Euge82