swap A4 5 speed tranny w/ S4 6 speed
1st Gear
Joined: Dec 2007
Posts: 80
From:
RE: swap A4 5 speed tranny w/ S4 6 speed
Id like to know that as well! Hell Id like to know if you can do a straight swap engine and all!
as me about adomestic and I'll give you a good answer....when it comes to german I'm still a noob
as me about adomestic and I'll give you a good answer....when it comes to german I'm still a noob
1st Gear
Joined: Oct 2006
Posts: 113
From: Bronx, NYC
RE: swap A4 5 speed tranny w/ S4 6 speed
direct swap. will need to use the tranny mount off the passenger side of your 5 spd and the clutch/flywheel from your current engine. as far as the 2.7t 6 spd swap its possible. must change the axles, rear diff, k member as well as engine and trans of course. also need to rewire abs and the cluster/ecu
Site Moderator
Joined: Feb 2007
Posts: 9,004
From: Nor Cal
RE: swap A4 5 speed tranny w/ S4 6 speed
ORIGINAL: Zrowcool
as far as the 2.7t 6 spd swap its possible. must change the axles, rear diff, k member as well as engine and trans of course. also need to rewire abs and the cluster/ecu
as far as the 2.7t 6 spd swap its possible. must change the axles, rear diff, k member as well as engine and trans of course. also need to rewire abs and the cluster/ecu
2nd Gear
Joined: Jul 2007
Posts: 1,124
From:
RE: swap A4 5 speed tranny w/ S4 6 speed
is there any advantage to doing a 6 spd swap? and no its not possible to simply switch it out but its possible. if your gunna do an engine and tranny swap you would probably save a hugh headache and some money if u just buy an s4.
Zombie Defense Force
Joined: Mar 2007
Posts: 4,851
From: N/A
RE: swap A4 5 speed tranny w/ S4 6 speed
ORIGINAL: Zrowcool
direct swap. will need to use the tranny mount off the passenger side of your 5 spd and the clutch/flywheel from your current engine. as far as the 2.7t 6 spd swap its possible. must change the axles, rear diff, k member as well as engine and trans of course. also need to rewire abs and the cluster/ecu
direct swap. will need to use the tranny mount off the passenger side of your 5 spd and the clutch/flywheel from your current engine. as far as the 2.7t 6 spd swap its possible. must change the axles, rear diff, k member as well as engine and trans of course. also need to rewire abs and the cluster/ecu