Trade 300hp setup for less power setup?
#1
Trade 300hp setup for less power setup?
I recently purchased a 99.5 Avant, and while I puts out close to 300 hp, the peak performance doesn't come on until about 4000 RPM, and then from there, it pulls like a train.
Specs-
MTM Manifold, K24 Rs2 turbo and Wastegate, Mika GT2x chip, N75 race valve, green top injectors, 3" catless downpipe, CAI, and the associated bits to make it work in a 1.8t.
90% of my driving is done in the city, and I rarely can utilize the power- in every day driving.
So- I'd like to offer it up as a trade to someone who has a milder setup-Something like a ko4 (I'd need your manifold as well)with a nice chip slightly bigger injectors, and a performance DP. I also would need your stock airbox. 225-250hp would be perfect, with close to a stock looking torque curve, just higher numbers.
it's a hell of a trade, considering the Manifold itself sells for close to 2000 dollars!
Specs-
MTM Manifold, K24 Rs2 turbo and Wastegate, Mika GT2x chip, N75 race valve, green top injectors, 3" catless downpipe, CAI, and the associated bits to make it work in a 1.8t.
90% of my driving is done in the city, and I rarely can utilize the power- in every day driving.
So- I'd like to offer it up as a trade to someone who has a milder setup-Something like a ko4 (I'd need your manifold as well)with a nice chip slightly bigger injectors, and a performance DP. I also would need your stock airbox. 225-250hp would be perfect, with close to a stock looking torque curve, just higher numbers.
it's a hell of a trade, considering the Manifold itself sells for close to 2000 dollars!
#2
trade
will this set up work with the 2001 Audi A6 2.7t Twin Turbo quattro?
#3
greddy no it will not, this if for the a4, you need 2 turbo's and all that junk
#4
ok thank you for the info nice setup for someone ...
#6
Take a stock manifold and stock Turbo mines a b6 will ur work on mine
#7
x2 on the stock trade but ill throw cash in on my end
#8
How much on top $$? I'm considering selling it all outright..
Thread
Thread Starter
Forum
Replies
Last Post
cruciform
B5 Models
1
07-30-2011 02:59 AM
kmel65stang
Archive - Engine/Performance Parts
0
01-08-2008 11:54 AM