2000 A6 part out

Subscribe
Apr 13, 2011 | 12:41 AM
  #1  
I have a 2000 a6 i took the front end off to repair another 2000 a6. I am keeping the motor and turbos. removed from the car already are the front fenders, bumper and hood.

it has tan leather interior, but the passenger seat has a tear on one bolster i covered with duct tape. the DIC has bad pixels.

make me an offer on what you want, and i'll let you know. the tiptronic was in good condition when i drove it. i'm going to cherry pick some stuff if they don't sell (doors, glass, radiator, wheels) and scrap the rest in a couple weeks.
Apr 19, 2011 | 04:51 PM
  #2  
bump...

still some good parts on this car... radiator, doors, glass, deck lid, ecu, exhause, intercoolers, airbox, brake system components, tail lights, fuel tank, fuel pump, the list goes on...
Apr 20, 2011 | 07:24 PM
  #3  
Trunk - Lock solenoid
Looking for the rear trunk lock solenoid. It has a vacuum line attached and has a metal arm coming out to engage the lock. It's behind the carpet thingie that's screwed on the inside of the trunk lid. I can send a picture if your not sure what it looks like.
Apr 23, 2011 | 11:10 PM
  #4  
Looking for the moonroof motor. My cables went bad and the motor teeth are chewed up. I have a 2003 A4 so need to confirm the motor is the same.
Apr 24, 2011 | 09:05 PM
  #5  
Quote: Looking for the moonroof motor. My cables went bad and the motor teeth are chewed up. I have a 2003 A4 so need to confirm the motor is the same.
i haven't actually pulled the motor, but the motor and assembly are good, and motor p/n is 4B0 959 591 E according to the parts list.
Apr 26, 2011 | 08:07 AM
  #6  
Parts
I need a rear bumper cover with the spacing for the exhaust tips, do have that kind.I'm also redoing my 1998 A6( interior and exterior), so I need a bunch of stuff, driver's side view mirror,cup holders,mirror adjustor,inside rear view mirror,RH rear hind quarter. Could you show some photos so I can see what else I can get? Thanks
Apr 26, 2011 | 12:28 PM
  #7  
Quote: i haven't actually pulled the motor, but the motor and assembly are good, and motor p/n is 4B0 959 591 E according to the parts list.
Part number is off by a revision. I have found one from another part out.

Thank you though.
Apr 27, 2011 | 11:28 AM
  #8  
Quote: I need a rear bumper cover with the spacing for the exhaust tips, do have that kind.I'm also redoing my 1998 A6( interior and exterior), so I need a bunch of stuff, driver's side view mirror,cup holders,mirror adjustor,inside rear view mirror,RH rear hind quarter. Could you show some photos so I can see what else I can get? Thanks
what do you want pictures of? i can run out to the garage and take them for you. the car isn't wrecked. it blew the head gasket and i found the lock carrier broken when i was tearing it down. if i'm buying a new lock carrier, it's for my other A6 which has mods and suspension. the hood and fenders i needed for my other a6, and i'm keeping the motor and turbos. other than that it ran well and looked decent.
Apr 29, 2011 | 10:49 AM
  #9  
2001 a6 2.7t
I need to replace my interior rear view mirror. Do you have in black?

Stephen
Apr 30, 2011 | 03:20 PM
  #10  
i'll have to look but i'm pretty this one is black..
Subscribe