2000 A6 part out
I have a 2000 a6 i took the front end off to repair another 2000 a6. I am keeping the motor and turbos. removed from the car already are the front fenders, bumper and hood.
it has tan leather interior, but the passenger seat has a tear on one bolster i covered with duct tape. the DIC has bad pixels.
make me an offer on what you want, and i'll let you know. the tiptronic was in good condition when i drove it. i'm going to cherry pick some stuff if they don't sell (doors, glass, radiator, wheels) and scrap the rest in a couple weeks.
it has tan leather interior, but the passenger seat has a tear on one bolster i covered with duct tape. the DIC has bad pixels.
make me an offer on what you want, and i'll let you know. the tiptronic was in good condition when i drove it. i'm going to cherry pick some stuff if they don't sell (doors, glass, radiator, wheels) and scrap the rest in a couple weeks.
Looking for the rear trunk lock solenoid. It has a vacuum line attached and has a metal arm coming out to engage the lock. It's behind the carpet thingie that's screwed on the inside of the trunk lid. I can send a picture if your not sure what it looks like.
i haven't actually pulled the motor, but the motor and assembly are good, and motor p/n is 4B0 959 591 E according to the parts list.
I need a rear bumper cover with the spacing for the exhaust tips, do have that kind.I'm also redoing my 1998 A6( interior and exterior), so I need a bunch of stuff, driver's side view mirror,cup holders,mirror adjustor,inside rear view mirror,RH rear hind quarter. Could you show some photos so I can see what else I can get? Thanks
I need a rear bumper cover with the spacing for the exhaust tips, do have that kind.I'm also redoing my 1998 A6( interior and exterior), so I need a bunch of stuff, driver's side view mirror,cup holders,mirror adjustor,inside rear view mirror,RH rear hind quarter. Could you show some photos so I can see what else I can get? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Justen
Archive - Engine/Performance Parts
4
Oct 20, 2012 11:13 AM




