Hello!
I want to activate the alarm horn on my a4-02 B6, I want it to sound when i'm arming the alarm.
I'm using vagcom ver311.2. When i go in to comfortsystem and try to add 1024it wont take the newcode! Have anyone done this before? If sameone have done it did you loggin before or not?
If you had to loggin canyou share the code.
(Comfort System)
Coding -> Function 07
+00001 - 10 Tamper alarms (Great Britain)
+00002 - Confirmation Anti-theft warning system blinks
+00004 - Selective Central Locking (SCL)
+00008 - Anti-theft warning system - activation of AWS
+00016 - Rear lid release locking via speed
+00032 - Comfort Locking via speed
+00064 - Comfort function via remote control
+00128 - Right Hand Drive (RHD)
+00256 - Avant bit
+00512 - Confirmation remote closing (1x blink)
+01024 - Confirmation anti-theft warning sytem horn activation
+02048 - Door-/ window regulator logic
+04096 - Thatcham anti-theft warning
+08192 - No safe-function
+16384 - Side windows with insulated glass

Thanks for all help!
/ David

 

If the control module wont take the coding it is not a possible code for that control module. There is no login required to change the coding in that module.

 

Are you sure that there are different comfort control moduls installed in the a4 cars. I got this one.

Address 46 ------------------------------------------------------
-
Controller: 8E0 959 433 AF
Component: Komfortgerát T03 0316
Coding: 06976
Shop #: WSC 63351
No fault code found.

/ David

 

Check and see if you have control module 35 central locking. Try changing the coding there.