Anyone know trq specs 4 head bolts AEB A4?
#2
RE: Anyone know trq specs 4 head bolts AEB A4?
Tighten cylinder head bolts in sequential order, in two stages:
Step 1 = 60 Nm (44 ft lb)
Step 2 = additional 1/2 turn using rigid wrench (180 is equivalent to two 90turns)
Hope this helps
[IMG]local://upfiles/10526/157330DA7C454600A40A1349E0A71354.gif[/IMG]
Step 1 = 60 Nm (44 ft lb)
Step 2 = additional 1/2 turn using rigid wrench (180 is equivalent to two 90turns)
Hope this helps
[IMG]local://upfiles/10526/157330DA7C454600A40A1349E0A71354.gif[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post