I am trying to do the clear corner mod on my b6 without the autoleveling feature. After I get the meatal clip and the three screws off, I cannot get the actual light out of the headlight. I unscrewed the leveling screw all the way and it still seems to be catching on it. I sat there for hours and I just can't get the light out. Does anybody know of anyother ways to get the reflector out or am I doing it wrong? Thanks

 

are you using these directions?
http://www.a4mods.com/index.php?page...earcorner.html

 

No, those are for the autoleveling headlights

 

That mod works for both, I don't have the autolevel mod and it worked perfectly for me

 

oh ok. when you did yours though, did you have trouble getting the low beam light out of the headlight. It does not show how to do it on that site and I cant get it out

 

Do you mean the actual bulb?

 

no the whole middle lense thing. isnt that how you get the reflector out?

 

No, you don't take the center pieces out. After you have gotten the reflector loose, you angle the lights up and slide it out underneath them.

 

oh ok. I read somewhere that I had to take the whole middle thing out and loosen the adjustment screw all the way to get the reflector out. it took me all day and I got nowhere. The only problem for me now is that my adjustment screw is all stripped. So all I need to do is take the reflector out with the dremel and then slide it under the lights. Thanks. that should definitely help

 

Right, just make sure you take out the small holder that is put in place of the motors(for the autolevel option) so that you can easily tilt the lights.