What headlights are you getting?

 

im only allowed to have 35% on all roll down windows, so all atleast just keep the drivers and pasangers window legal and the rears i could care less about. i meann comeone would you rather me just do 25% all the way around![&:]

 

The final price with 300 shipped off ebay with h7 halogen bulbs.
now i need to buy every thing i need for hid's. im still a little confused on what i have to get.

 

with HID's, you gotta use these.....

http://vvme.com/product/detail-20023.html

 

ok so i can buy that, then all i will need is 4 hid bulbs?

 

bah. don't mix tints. get something all the way around

 

you don't need HIDs in your high beams. order one HID kit from vvme.com, and use regular H7 bulbs in the high beams. you won't even use your high beams after you've got the HID low beams, trust me.

the vvme kit comes with everything you need to plug & play, the only mod you'll need to do is to cut/drill a hole in the dust cap behind the low beam projector for the wiring harness to pass through. the vvme kit even comes with grommets so that water and other crap stay out of your headlights.

 

The kit only powers two bulbs which are supplied in the kit. you plug two wires into where your old halogen bulb plugged into inside the headlight, that wire goes out to a ballast/ignighter that changes the 12v current into something like 24000v to ignight the gas in the bulb which is installed in the projector ion slot in your headlight. you can buy two kits and run low's and high's as HID's but that would be overkill. you'll never need it once you see how much output your low's put out on a dark road.

 

Thanks for the help guess all be sure to order that kit. but do you guys really think my tint will be that bad? i wanna have my front windows legal...35% my rears should only be 35% to but i dont care to much about that.

 

i would just go 20% all around but if you are really that worried then go 35% all around IMO different shades of tint dont really mesh well together