mbc install.........please help.
Thread Starter
|
3rd Gear
Joined: Dec 2004
Posts: 2,156
From: chicago burbs
mbc install.........please help.
well i got all new vac lines today and installed my samco tip. but i still only get around 8psi with my mbc???? any help would be great. if u need more info on my car just ask. thanks.
Thread Starter
|
3rd Gear
Joined: Dec 2004
Posts: 2,156
From: chicago burbs
RE: mbc install.........please help.
diafram??? my mbc is hooked up by itself, but i left the n75 plugged in. its a forge mbc with the 3 prongs and its hooked up wit the bottom one going into the tip, one going from turbo and 1 going to wastegate.
Thread Starter
|
3rd Gear
Joined: Dec 2004
Posts: 2,156
From: chicago burbs
RE: mbc install.........please help.
i tried that then plugged in the stock n75 and i am only getting about 10 psi??????? i dunno whats wrong......could it be the new hoses that i put on???? dose anyone know the correct hose size?
2nd Gear
Joined: Jun 2005
Posts: 1,498
From: Neptune Beach, FL
RE: mbc install.........please help.
ok...here is what you do...
one hose goes into wastegate.
one hose goes to intake manifold.
one hose goes to n75 valve.
That is how my mbc was hooked up on the gt28r. It was a pos from ebay and it worked.
one hose goes into wastegate.
one hose goes to intake manifold.
one hose goes to n75 valve.
That is how my mbc was hooked up on the gt28r. It was a pos from ebay and it worked.
