Steel-braided hoses for K04 anyone????
Thread Starter
|
2nd Gear
Joined: Feb 2007
Posts: 613
From: Hilton Head
Steel-braided hoses for K04 anyone????
I am having a very tough time trying to find steel-braided hoses that are compatible with a K04. The hoses connect to the turbo from the motor. One in particular connects to the wastegate. If anyone know where to find these or can help me out in any way it would be much appreciated
[IMG]local://upfiles/30812/9A5407B5A25B49DEB7ECBE121985F97C.jpg[/IMG]
[IMG]local://upfiles/30812/9A5407B5A25B49DEB7ECBE121985F97C.jpg[/IMG]
Junior Member
Joined: Nov 2006
Posts: 5
RE: Steel-braided hoses for K04 anyone????
I don't know, I've asked several questions on this forum and haven't gotten any answers. Of course they were 'intelligent' questions, not bragging about my 'phat' ride or whether 21" wheels will fit on my car.
In any case I had good luck with-
http://www.atpturbo.com/Merchant2/merchant.mvc
I replaced the turbo oil feed line with a braided one that routes around the front of the motor. They also had the Audi/VW adaptors for the turbo and oil cooler housing.
Several places will make up lines for you (http://www.holley.com/index.asp?division=Earls) but you have to know the size you need. There are other places you can buy the pieces and make whatever you want. I don't have any experience with the K04 sizes, so I'd try ATP first.
In any case I had good luck with-
http://www.atpturbo.com/Merchant2/merchant.mvc
I replaced the turbo oil feed line with a braided one that routes around the front of the motor. They also had the Audi/VW adaptors for the turbo and oil cooler housing.
Several places will make up lines for you (http://www.holley.com/index.asp?division=Earls) but you have to know the size you need. There are other places you can buy the pieces and make whatever you want. I don't have any experience with the K04 sizes, so I'd try ATP first.
Thread
Thread Starter
Forum
Replies
Last Post
