Will an uncut a6 key work in an a4?
ORIGINAL: Jestnomen
You mean they actually stock the key, or they have the ability to cut them?
You mean they actually stock the key, or they have the ability to cut them?
My dad works there and I already talked to the distributor.
yeah they just started doing it. I think they are testing it to see the response.
http://autozone.com/servlet/UiBroker...ters=%7C%7Eyes
Hope that link works for you.
Fine print:
I did however find this site: http://www.keylessride.com/default.asp
for my remote & key it is $83.
http://autozone.com/servlet/UiBroker...ters=%7C%7Eyes
Hope that link works for you.
Fine print:
REMOTES ARE AVAILABLE FROM $49.99 TO $199.99 REPLACEMENT REMOTE CONTROLS ARE NOW AVAILABLE FOR FACTORY KEYLESS ENTRY AND AFTERMARKET ALARM SYSTEMS. BEFORE YOU CALL YOU MUST HAVE THE FOLLOWING: 1. CUSTOMER PRESENT. 2. CUSTOMERS OLD REMOTE IN HAND AND FCC ID# FROM BACK OF REMOTE READ AND READY TO REPEAT TO CSR. 3. IF NO REMOTE IS PRESENT; YEAR, MAKE AND MODEL OF VEHICLE OR BRAND NAME AND MODEL OF AFTERMARKET SYSTEM. TO GET PRICE FOR PART CALL REMOTES UNLIMITED AT 866-728-8696 (866-7AUTOZONE) ******* IMPORTANT ******* PART NUMBER WILL BE GIVEN BY CSR ONLY WHEN ORDER IS BEING PLACED. ENTER PART NUMBER INTO WITT TO CHECK AVAILBILITY AND COMPLETE THE VDP ORDER
for my remote & key it is $83.
Works perfect Jestnomen!
I followed these instructions:
1. Take a spare key and insert it into the ignition. Turn it one click forward.
2. Roll down your window just in case. Step outside the car, and lock the car with a second key.
2b. Take key out of lock (it wouldn't program with the key in the lock for some reason)
3. With your second key fob press the unlock button. The lights should flash.
4. Now lock the car with the key fob, and then unlock it.
5. Remove the key from the lock and the key from the ignition, and try it's function.
I couldn't get an uncut key, so I bought a a6 remote with a cut ke ($15) and then just a blank blade ($20) (the dealer cut it for $10 bucks), and followed these instructions to swap blades:
Swapping keyblades…
The keyblade is held in place with a small roll pin, flip out the keyblade halfway and you'll see it. To separate the keyblade from the device, just hammer out the pin with an appropriately sized punch or nail. After that, you should be able to pull the keyblade away from the device. If you can remove the keyblade properly, you can figure out how to reinstall it onto a new remote on your own. When reinstalling, just make sure the side of the keyblade with the logo “Huf†is facing the opposite side of the panic button when flipped outward, or else the roll pin would not go in
I followed these instructions:
1. Take a spare key and insert it into the ignition. Turn it one click forward.
2. Roll down your window just in case. Step outside the car, and lock the car with a second key.
2b. Take key out of lock (it wouldn't program with the key in the lock for some reason)
3. With your second key fob press the unlock button. The lights should flash.
4. Now lock the car with the key fob, and then unlock it.
5. Remove the key from the lock and the key from the ignition, and try it's function.
I couldn't get an uncut key, so I bought a a6 remote with a cut ke ($15) and then just a blank blade ($20) (the dealer cut it for $10 bucks), and followed these instructions to swap blades:
Swapping keyblades…
The keyblade is held in place with a small roll pin, flip out the keyblade halfway and you'll see it. To separate the keyblade from the device, just hammer out the pin with an appropriately sized punch or nail. After that, you should be able to pull the keyblade away from the device. If you can remove the keyblade properly, you can figure out how to reinstall it onto a new remote on your own. When reinstalling, just make sure the side of the keyblade with the logo “Huf†is facing the opposite side of the panic button when flipped outward, or else the roll pin would not go in
Thread
Thread Starter
Forum
Replies
Last Post
Timewise
Archive - Misc Items for Sale
0
May 22, 2008 04:11 PM
Timewise
Archive - Misc Items for Sale
0
Jan 23, 2008 01:48 PM
fastfreddy
Archive - Interior/Electrical/Stereo
9
Apr 24, 2006 10:19 PM
102, 1997, 2674, 4d0837246b, 4do837231d, 665, a4, a6, audi, fob, key, replacement, touareg, uncut, vdo




