Control Arms
#1
Control Arms
I have a 96 A6 Avant and think I finally have to replace the control arms. I get a thud when starting fom a stop, turning the wheel and various times in and out of driveway.
Blauparts sells a kit with additional bushings and hardware for around $240. Are their parts good or should I go with a 'brand', MOOG, TRW and just buy the additional bushings & hardware? Blauparts only states they are German made, no brand name.
Whats the AF's opinion?
Thanks.
Blauparts sells a kit with additional bushings and hardware for around $240. Are their parts good or should I go with a 'brand', MOOG, TRW and just buy the additional bushings & hardware? Blauparts only states they are German made, no brand name.
Whats the AF's opinion?
Thanks.
#2
Go with a brand name. The "German" made ones are made in China. I bought a set, although not from Blauparts. You cannot tell them from Audi parts. Same labeling, same packaging, same color bushings. However, they lasted about a month then started going bad one at a time. The company I bought them from was very good about replacing them one at a time, however the news one last about another month and I have to get an alignment after each one. I replaced the last two with Mahle parts, made in Turkey. I have more going bad now and I will have to see but I suspect the more of the Chinese ones have gone bad. This time I will redo the whole front end with a name brand set. let my bad experience be a lesson.
Bob
Bob
#4
Thread
Thread Starter
Forum
Replies
Last Post
jdahlen24
DIY - Do It Yourself
5
08-25-2011 09:50 PM
jdahlen24
DIY - Do It Yourself
0
08-25-2011 03:05 PM