The factory oil filter housing cap on your Audi doesn't jive with the rest of the engine bay's fine materials. The super-slick black billet aluminum cap by ECS corrects this oversight, while adding another dimension of increased longevity, durability, and ease of use.

Black anodizing maintains the OE look, while durable billet aluminum brings the part up to the highest standards.

Our ECS Tuning billet aluminum oil filter housing cap are designed and engineered in house by our leading R&D department to make sure of the perfect fit.

• Pop the hood, remove your rear engine cover exposing the filter cap.
• Use a 32mm socket to unscrew the housing cap from the engine.
• Remove the old filter and o-ring, and install a new one.
• Replace the rubber housing oil rings with the new o-rings contained a new filter kit.
• Screw the housing on to the engine, and torque to 25Nm or 18ft lbs.
• Add a Audi approved 502 / 505 engine oil. (Not sure about the right oil? Visit our Maintenance section!)

That's it. No more cracked housings. No more plastic filter caps mangled by adjustable pliers.Talk about a no-brainer.

Oil Slick

Click HERE to order or for more information


Fits Audi 4.2L V8 FSI:
C6 A6 (05-11)
D3 A8 (03-10)

Let me know if you have any questions

Jason

 

May have to get one for my A8

 

Jason

 

Saw that it does no work on the D4, which is what I have.

 

Unfortunately these only fit D3 A8 (03-10)

Although we are always adding products to our line up so it doesn't mean that one wont ever be available for your vehicle.

Jason