Audi TT The Audi TT line, in both the coupe and roadster combines Audi's All Wheel Drive performance with the feel of a European sports car.

braided vacuum hose size?

Thread Tools
 
Search this Thread
 
  #21  
Old 09-11-2007, 09:15 PM
Wintermute's Avatar
2nd Gear
Join Date: Mar 2006
Location: Chester/Sterling Forest, NY
Posts: 1,288
Default RE: braided vacuum hose size?

That's all the DV kit does? Moves it couple inches away?
 
  #22  
Old 09-11-2007, 09:20 PM
cincyTT's Avatar
I'm make believe
Join Date: Dec 2006
Location: In my head
Posts: 17,587
Default RE: braided vacuum hose size?

takes it from jsut off the turbo - bad location
to next to the tb - good location

the temps are lower on the dv and the biggest reason is it allows the turbo to spool faster between shifts with it located there
 
  #23  
Old 09-11-2007, 09:24 PM
moeron7's Avatar
2nd Gear
Join Date: Jan 2007
Location:
Posts: 1,345
Default RE: braided vacuum hose size?

Why is that? It couldnt be too much of a temp difference could it?
 
  #24  
Old 09-11-2007, 09:25 PM
shkenned's Avatar
Senior Member
Join Date: May 2007
Location:
Posts: 137
Default RE: braided vacuum hose size?

Neur0tic, you happen to have a pic of your engine w/ the new hoses? I was thinking about doing the silver also, and was curious how it looked vs. the red above....
 
  #25  
Old 09-11-2007, 09:28 PM
cincyTT's Avatar
I'm make believe
Join Date: Dec 2006
Location: In my head
Posts: 17,587
Default RE: braided vacuum hose size?

ORIGINAL: moeron7

Why is that? It couldnt be too much of a temp difference could it?
Pre vs post intercooler, i would say thats a VERY big difference in temps.... maybe 80-100*C
 
  #26  
Old 09-11-2007, 09:34 PM
moeron7's Avatar
2nd Gear
Join Date: Jan 2007
Location:
Posts: 1,345
Default RE: braided vacuum hose size?

ORIGINAL: cincyTT

ORIGINAL: moeron7

Why is that? It couldnt be too much of a temp difference could it?
Pre vs post intercooler, i would say thats a VERY big difference in temps.... maybe 80-100*C
But don't they both still come off of theTIP?
 
  #27  
Old 09-11-2007, 09:51 PM
neur0tic's Avatar
2nd Gear
Join Date: Oct 2006
Location: Columbus, GA
Posts: 1,362
Default RE: braided vacuum hose size?

I haven't received them yet. I'd been looking for a week or so and just bought it all a few days ago. I'll have pictures during and after install once it's here.
 
  #28  
Old 09-11-2007, 09:52 PM
shkenned's Avatar
Senior Member
Join Date: May 2007
Location:
Posts: 137
Default RE: braided vacuum hose size?

Ah, nice. I knew you'd been talking about it a few weeks back, wasn't sure how it was coming along or if shipping was screwing ya over.
 
  #29  
Old 09-11-2007, 10:00 PM
cincyTT's Avatar
I'm make believe
Join Date: Dec 2006
Location: In my head
Posts: 17,587
Default RE: braided vacuum hose size?

ORIGINAL: moeron7

But don't they both still come off of theTIP?
Thats the recirculated point back to the intake. The dv was drawing the air from the charge pipe just off the turbo and now itsmoved to the pressure side post ic. Now the recirculated air gets past the valve faster and goes back to the intake.
 
  #30  
Old 09-12-2007, 03:04 PM
themysteryman83's Avatar
2nd Gear
Thread Starter
Join Date: Aug 2007
Location:
Posts: 502
Default RE: braided vacuum hose size?

I was reading on the website that oil and fuel do bad things to silicone. How do you get around the oilresidue that goes through vacuum lines on a regular basis?
 


Quick Reply: braided vacuum hose size?



All times are GMT -4. The time now is 06:28 AM.