Got vmaxxed!
ORIGINAL: Euroluv
well this guy has a lil tuck...the rears seem a lil high to me but seems like a good set up.

well this guy has a lil tuck...the rears seem a lil high to me but seems like a good set up.


gotta love the rears!!

ORIGINAL: M and N
camber does not wear tires out that fast its toe
camber does not wear tires out that fast its toe
Quattros toe-in as their camber increasees (well technically decreases). Their toe is directly related to their camber and can't be adjusted without adjustable rear control arms or KMAC bushings.
FWD on the other hand doesn't

ORIGINAL: M and N
camber does not wear tires out that fast its toe
camber does not wear tires out that fast its toe
You have it backwards for our cars, sorry. Toe-in increases as you lower the car because of the geometry of the car, BUT not enough to wear the tires like you are implying. If you wear the tires that way, and assuming the camber was negative too, you would have an almost flat and ROUGH wear pattern, deeper on the inside of the tire than the out, because you would be "chewing" tires. But instead you usually get the inside wear at a smooth, round and even wear, which is a result of camber and caster. If you had no toe-in and lots of camber, it would do the same.
Now if you have weak and worn shocks with lots of negative CAMBER, you will get an evenly cupped pattern on the inside of your tires real fast, whereas if you have the same with lots of toe-in, you would have random flat spots.
ORIGINAL: cincyTT
That thread was retarted.
That thread was retarted.
Didn't you know that civics and TT's are twins!!!? haha


