I am very irritated at the moment I cleaned connectors now the car won't start!.... Here is exactly what I did

1) pulled negative battery cable.
2) then I pulled the cluster out cleaned the connectors with crc qd electronic cleaner sprayed some of the circuitry board of the cluster.
3) pulled my heater controls out and disassembled it and sprayed it out! (It is now working perfectly)
4) then I pulled the green, brown, black and blue connectors from under the hood sprayed them out.
5) I pulled the air filter box cleaned all the connectors attached to it and the mass air flow sensor
6) let everything dry in the sun for about 30-45 minutes
7) put dielectric grease on the connectors under the hood and re-assembled everything.
8) attempted to start the car! It is cranking just fine but no start

 

Just realized both oil and water warning lights are flashing at me