Shifter linkage upgrades
#4
I know JHM is top quality and that they have some sales right now.... I am considering their stabilizer bushing, not sure if I want (or need) to spend the $100 (after shipping) on the other bushing they offer. The bushings I am MOST interested in are the ones they only sell with their short shifter... the 2 piece bushings that go on the 2 arms on the shifter base. The oem rubber ones are really worn out and are only available with the whole shifter base. I tried replacing the oem rubber ones with the plastic ones that came with my ebay SS, but they are waaay too tight and don't allow the base to move at all and I want it to be able to move a little rather than wear on my already worn out stabilizer bushing (or soon to be new jhm one). I am almost ready to try and sand them down a little on the inside (hit it with the dremel) and see if that will let them slide a little. If not I am going to have to put the oem ones back in....
Sorry for the long post.
Sorry for the long post.
Thread
Thread Starter
Forum
Replies
Last Post
jibberjive
Archive - Interior/Electrical/Stereo
2
02-24-2009 12:57 AM
jibberjive
Archive - Engine/Performance Parts
0
01-09-2009 09:16 AM