Hey guys, I have been working with our rep at Clutch Masters to come up with a special deal on a package deal that will include a 14 lbs Billet Steel flywheel and a choice of either the FX400 or FX300. The set price will be $920 including Free ground shipping within the Continental United States, any orders that need to be shipped anywhere else wanting quicker shipping will be given a $20 credit toward the shipping cost. This special package price comes out to be a savings of $150 off our already very low price on our web site.




Flywheel
14lbs Billet Steel Flywheel
Clutch
FX400
Holding capacity 170% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage pressure ring design
Sprung hub/6 button or 4-button Ceramic friction material
SFI Approved on most race applications.
*Optional 8 pad segmented ceramic full disk


FX300
Holding capacity 110% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage pressure ring design
Sprung hub/cushioned disc
Steel backed Segmented Carbon/Kevlar

This special will only last for about 30 days, so now is the perfect time to grab that clutch/lwfw setup that you might need for this summer or that turbo upgrade you have been planning to do.

This is GB pricing without any of the GB hassle, orders go out as they are placed/paid which means no waiting for a set amount of people to get in so you can get your parts shipped out to you.

If you are interested in getting this package at this great price please send me a PM or

 

What is the feel of the performance clutch kits vs. the non agressive ones? I just got a new 04 A4 that had the clutch replaced and I really dont like the feel (activates very abrutly) vs. the stock manual transmission a4s I have tried. Its the 3.0 Ultra sport, not sure if there is a different clutch put in these?

 

Well it depends on what type of material is used on the disk, some will have a little more aggressive feel to them since they grab a bit harder where as the clutch with an organic material tends to have a soft feel to it since it can slip a bit as you apply the clutch.

 

Would it fit a 2003 3.0l MT6? I'm looking for a heavier duty clutch but not interested in high pedal pressure or racing the car.

 

No it wont, but if you PM me I can get you a price on a Clutch Master setup for your car.


Here is the clutch kits we offer on our site for the 3.0 and 2.0 which both use the same clutch kit.

 

Only 7 days left on this special, it ends on 2/28. Great setup for a really low price.